Allan September 08, 2022 for Model Number SHE44C05UC/40 My control panel fascia is cracked and I can power the dishwasher on or select the wash cycle. Do I need the control panel cover p/n AP3855124 and the control panel frame p/n AP3382390 or only the cover?
Jennifer November 30, 2020 for Model Number SHE45M02UC/50 The door panel is pulling loose when I open the dishwasher door , I manage to align it and it seems to fit ok until I close it and try to open again, does the same thing can i just replace it.
1 Answer Jennifer, it would be recommended that the facia 00478810 is inspected to identify if it has any broken brackets or loose screws that could be causing this issue. If there are any broken brackets on the facia, it would need to be replaced to secure it firmly to the inner liner. Read More...
Casey October 22, 2020 for Model Number SHE43F16UC/64 Katy thanks so much for all your help! All back together but the control buttons on the right side are loose and it shows a C6 in the window? What is this and why?
1 Answer Casey, the error C6 is going to indicate a ventilation fan moving too slowly. However, the model number provided does not utilize a vent fan. As this is the case, it is possible that there may be a wire connection that is loose or a failed main control 00676962. Read More...
Casey October 22, 2020 for Model Number SHE43F16UC/64 Older model Bosch dishwasher SHE43F16UC/64. I replaced the front fascia because of cracks in the panel. In your video you show a white appears plastic flexible insulator strip that attaches to the top of the panel that the fascia panel attaches onto. Mine does not have this insulator strip. How important is this strip?
1 Answer Casey, If the strip was not on the unit then it was not used in this model dishwasher and would not be needed. Read More...
Kim June 15, 2020 for Model Number Bosch Dishwasher SHE55M15UC/64 hi, there is a crack in the control panel on my Bosch dishwasher. The handle started to feel a little loose, and then when I opened it the other day, a crack appeared in the panel just underneath the 'power scrub wash and auto wash' buttons. Which part do I need to replace? The control panel frame? or the control panel itself? Please help! I am going to attempt to DIY it but may call in for reinforcements if it's too hard.....!
1 Answer Kim, With the control panel cracking under the buttons then the fascia panel 00665887 would be what is needed. Read More...
Tom P October 10, 2017 for Model Number SHE55M15UC/64 I need the part number for the 2 plastic clips that screw into the control frame (AP3382390). I am replacing the front panel-facia and found that the 2 plastic clips screwed to the control frame are broken. The Control Panel Parts diagram shows the holes where the clips screw to the control frame, but not the 2 plastic L-shaped clips.
1 Answer Tom, We are not showing L shaped clips that would be on the control panel and anything to screw to the control panel will screw directly into the control panel. Read More...
Rob December 10, 2016 for Model Number SHE23R55UC/64 Something broke on the door frame that holds everything in place. When I open the door, the right side pulls away. It appears the clip is broken on the frame that holds the top part in place. Do I just need to order the frame part # 00432779? Thanks
1 Answer Rob, Yes, If there is a clip on the frame that is broken causing the door to separate then the frame would need replaced. Closely inspect the fascia panel to make sure that it is not broken also. Read More...
Steve April 14, 2016 for Model Number Bosch SHE43P25UC/61 The 'delay start' button on the right side panel has popped out. It doesn't appear that the button broke but the plastic part that it snaps into. I'm confused which part I should be ordering to replace. Any help?
1 Answer Steve, The part number of the part that is needed for the buttons would be the button assembly 00600071. Read More...
Darren May 17, 2014 for Model Number SHE45M06UC/48 I need the clips that hold the fascia to the back plate (AP3382390). What is the part number for the clips? Thanks.
1 Answer Darren, the clips are not available separate from the fascia panel part number 00478812. Thanks. Read More...