Peter November 23, 2020 for Model Number Unknown Hi, the switch on my Thermador range hood broke. The potentiometer is labeled Trivar CM-18RT1. I found the exact replacement online, but it's nearly $500. When I search for that part, I also see Bosch Part# 00414750 frequently come up in the ads. Can you tell me if 00414750 would work as a replacement for Trivar CM-18RT1. It says: A min: 2.5 A max: 8.0 Vac: 120 AFL: 8 AFL 16 Thanks
1 Answer Peter, To be able to assist properly with your question we will need to have the model number of your unit. Read More...
1 Answer John, without the model number for the unit in question, we would not be able to guarantee the proper operation of this switch. If the model number could be provided in a new inquiry, this will allow for the most accurate information to be presented. Read More...
Mark June 01, 2019 for Model Number PH54HQS Need to replace switch, speed control for fan/blower on Thermador range. Part 19-11-815 no longer available. Can you suggest replacement part or different solution which works (even if only on/off switch). Thanks
1 Answer Hello Mark, I'm sorry but this part 00415397 has been discontinued by the manufacturer and no satisfactory substitutions have been provided. Thank you for your patience and understanding in this matter. Read More...
Michael March 23, 2019 When connecting the vch-8 speed control, should three black wires be connected together? Black to Black to Black Brown to white White with black stripe to Red I have black to black connected and have no power to unit there is a third black wire that is not connected to anything.
1 Answer Michael, The white wire with black stripe would most likely be connected to the white wire and the brown to the red wire. The other black should tie in with the black wires. Read More...
Michael March 08, 2019 for Model Number thermador VCH-8 The stem that holds my fan control button broke off. Do I need to replace the entire control part # 00414750? My current part does not have a ground wire. Where do I connect ground wire to?
1 Answer Michael, you would need to change the entire speed control. The black wire goes to the black wire splice from the light switch. The tan wire goes to the white wire from the pilot light. The black and white wire goes to the red wire. Read More...
Joe December 05, 2018 for Model Number Mercury Nutone M-3T ductless hood Do you have a fan speed switch or can you recommend a substitute switch for my old mercury nutone ductless hood model M-3T Thanks
Lewis Mcdermott December 31, 2016 for Model Number Thermidorian range hood HT36HQS Fan Speed Control 00486762 Appliance repair person said I must have this part in order to fix my fan. Any suggestion on where I might find this part?
1 Answer Lewis, Unfortunately the speed control switch 00486762 for your unit has been discontinued by the manufacturer with no suitable replacement available. Read More...
Mc July 22, 2016 for Model Number VCH-6 Good afternoon, We have a Thermador hood Model VCH-6 and cannot locate the motor on the diagram or part list. There is fan switch 00414750 but no fan motor listed that it controls...
1 Answer MC, The blower housing on this unit would be a separate part or model number from the unit itself. You would need to look on the side of the motor and see if there is a part number on it. Read More...
T Davis May 04, 2015 for Model Number custom hood fan My son has a custom made range hood with variable speed exhaust fan, and the control is in the wall next to the cooktop. The knob to the rheostat was lost and a repair man removed the unit and replaced it with the only one he could find. But it no longer works correctly. You must turn the knob all the way on to turn the fan on, and it only operates at the highest speed...no more variable speeds. What kind of rehostat should be used. This is a custom fan that was made to order and I have no information on it, Please help!
1 Answer T. Davis, To properly assist you we will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Oscar January 25, 2015 for Model Number Thermador Mod.1480S When you turn the switch to high, the fan rotate like it's on low, then stops. After a while it will run again. What might be the problem? If it is the switch can I still get this part?
1 Answer Hello Oscar, You should verify the model number from the units' I'.D. tag since I have been unable to get this number to pull up as a valid number. I'm sorry for the added trouble. Thank you for your patience and understanding in this matter. Read More...