Thermador Range Hood Parts

The Aluminum Grease Filter is an OEM part for Bosch range hoods. It is designed to capture and filter out grease particles from the air, preventing them from accumulating on the internal components of the range hood and ensuring efficient ventilation. This chrome-colored filter measures approximately 30 inches wide and 9.5 inches deep. 

The aluminum grease filter should be replaced when it becomes clogged, damaged, or worn out. Causes of a bad grease filter can include prolonged exposure to grease and cooking residues, improper cleaning, or physical damage such as dents or warping.

Symptoms of a bad grease filter include:

• Reduced ventilation efficiency
• Grease accumulation on kitchen surfaces
• Unpleasant odors emanating from the range hood
• Visible damage or deformation of the filter

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Vent Switch is an OEM replacement part for Bosch range hoods. It is an electronic control device located inside the range hood that regulates the internal vent and fan functions.

Causes of a faulty vent switch can include long-term use in high-heat cooking environments, damage from accidental spills or impacts, or normal component degradation over time.

Symptoms include:

• Failure of the fan or vents to engage during cooking  
• Variable or inconsistent fan speeds that don't adequately vent smoke
• Electrical shorting or sparking noises from within the hood control unit

This genuine Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore range hood models.

The Range Filter is an OEM part for Bosch range hoods. It is designed to trap grease, smoke, and other airborne particles during cooking, helping to keep the kitchen air clean and preventing buildup on the internal components of the range hood. It measures approximately 10-3/4" x 24-1/2".

Common causes of a bad range filter include accumulation of grease and debris from regular cooking, wear and tear from cleaning, and physical damage such as bends or breaks in the filter material.

Symptoms of a bad range filter include:

• Reduced airflow or ventilation efficiency
• Excessive smoke or odors lingering in the kitchen
• Visible grease buildup on the filter
• The filter appearing damaged or misshapen

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Control Label Overlay is an OEM part for Bosch range hoods. It is the interface label for the range hood's control panel, featuring clear markings for each function, from fan speed adjustments to light settings.

Causes of a bad Control Label Overlay can include exposure to heat and moisture, which can lead to the overlay peeling or the labels fading. 

Symptoms of a bad Control Label Overlay include:

• Difficulty in identifying control functions due to faded or worn labels
• Peeling or damaged overlay that compromises usability and appearance
• The need to guess or remember control locations due to obscured labels

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Color: chrome. Measures about 12-1/2 inches wide by 5 inches high.

The Control Panel Overlay is an OEM part for Bosch range hoods. This overlay is a decorative and functional cover that fits over the control panel, providing clear labels for the buttons and controls. It allows users to easily operate and view the settings of the range hood, ensuring efficient ventilation and lighting in the kitchen.

Causes of a bad overlay can include regular wear and tear, exposure to heat and moisture, or physical damage from cleaning agents. 

Symptoms of a bad control panel overlay include:

• Faded or illegible labels
• Peeling or bubbling of the overlay surface
• Difficulty in pressing the buttons or selecting settings
• Visible wear and tear affecting functionality

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Vent Control Button is an OEM component specifically designed for select Bosch downdraft ventilation ranges. Pressable from the countertop, its reliable switch operates the vent position. Precise guidance aligns ductwork airflows. 

Symptoms of a faulty control button may include intermittent or unresponsive vent movement. Over-activation degrades contacts requiring change. 

Causes of a bad button relate to typical contact wear reducing conductivity. Splashes introduce moisture necessitating replacement over time.

Causes of a bad vent control button involve:

• Vents remaining stuck open exposing grease-laden air  
• Closed vents trapping cooking emissions near surfaces
• Failure to change vent direction as needed 

This OEM Bosch part is also compatible with some Thermador, Dacor, and Viking downdraft ventilation ranges. Replace to maintain convenient vent management directing smoke and odors safely outdoors.
 

The Halogen Lamp Assembly is an OEM component specifically designed for Bosch range hoods. As the primary lighting fixture, this assembly houses and protects the delicate halogen bulbs that illuminate the cooktop below.

Causes of a faulty lamp assembly include standard halogen bulb burnout over time. Physical impacts or other damage that compromise the assembly housing can also lead to ineffective lighting.

Symptoms of a bad lamp assembly include:  

• Dim or absent light emitted from the range hood
• Discoloration around bulb sockets indicating potential heat damage
• Flickering or inconsistent illumination  
• Bulbs blowing prematurely 

 This OEM part is compatible with Thermador, Gaggenau and some Kenmore hoods as well.

The Range Hood Halogen Lamp is an OEM part for Bosch range hoods. It provides illumination for the cooking area beneath the range hood, enhancing visibility while cooking. This halogen lamp is designed to fit seamlessly into the range hood, ensuring a bright and focused light.

You should replace this halogen lamp if it burns out or becomes faulty. Causes of a bad halogen lamp can include filament burnout from prolonged use, electrical surges, or damage from handling during cleaning or maintenance.

Symptoms of a bad halogen lamp include:

• Dim or flickering light
• No light when the range hood is turned on
• Discoloration or dark spots on the lamp
• Frequent bulb replacements needed

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This switch cover is a small protective cap that mounts over a control switch in the appliance's console. It helps keep the switch aligned and shielded so the button operates smoothly and the control remains reliable. What it does:

• Retains and protects a control switch within the console/control panel
• Helps ensure consistent button feel and proper actuation
• Helps keep dust and debris away from the switch area
• Replace if cracked, missing, or deformed; symptoms can include a loose or stuck button, intermittent on/off response, or failure to start

• 1 switch cover

• Disconnect power to the appliance before servicing
• Access the control panel to reach the switch area
• Note the cover's orientation; seat it fully and ensure a secure fit
• Reassemble the panel and test switch operation before restoring power

This control panel is the exterior fascia at the top of the dishwasher door. It provides the labeled surface for the user controls and restores proper button access and appearance when the original is cracked, broken, or worn.

• Serves as the door-mounted fascia for the dishwasher's user controls
• Provides the labeled button layout and covers/protects the control area
• Replaces cracked, loose, or broken panels that can make buttons difficult to press
• Refreshes worn graphics and scuffed or faded appearance

• Disconnect power at the circuit breaker before servicing
• Open the door and remove the screws securing the console/inner door to release the panel
• Support the panel; transfer any handle/trim and the existing switch/control components as required
• Reinstall, align, and secure screws; restore power and verify button operation

Keep your appliance's controls working reliably with this switch cover. It mounts over a switch to hold it in place and shield it from damage, helping ensure consistent actuation and long service life.

• Retains and protects a control/interlock switch within its housing
• Helps keep the switch aligned for reliable on/off detection
• Shields the switch from dust and incidental contact
• Cracked, loose, or missing cover can cause intermittent operation or no response when the control is pressed

• Disconnect power to the appliance before servicing
• Remove the necessary panel to access the switch; note wire positions/orientation
• Transfer any clips/screws from the old cover and seat the switch fully
• Secure wiring away from pinch points before reassembly

Color: metallic. Measures about 13-1/2 inches wide by 5 inches high.

The Grease Filter is an OEM part for Bosch ranges and cooktops. It is responsible for capturing and containing grease, oils, and other vapors produced from cooking to help keep indoor air fresh and prevent buildup. Regular cleaning is important to maintain optimal performance.

Causes of a bad grease filter can include excess buildup that blocks airflow from frequent high-heat cooking. Exposure to flames or excessive heat may cause damage over time as well.

Symptoms of a bad grease filter include:

• Reduced suction power and airflow from the range hood
• Grease accumulation on surrounding surfaces below the hood
• Unpleasant cooking odors escaping into the kitchen rather than being vented outside

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Knob, blk (cvs)

The Control Knob is an OEM part for Bosch ranges and cooktops. As the interface regulating gas flow, control knobs activate precise burner levels through internal calibration.

Causes of failure include loosened set screws beneath allowing knob slippage. Prolonged heat and moisture exposure may also degrade contact surfaces over time.

Symptoms of faulty knobs include:

• Burners failing to engage or not matching dial settings
• Inability to decrease output levels from full flame
• Knobs wobbling insecurely or detaching entirely

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This grease filter is a genuine Bosch part, sold individually. This grease filter can be used as a replacement part for a range vent hood. This part prevents the accumulation and buildup of external grease in the internal aspects of the range vent hood. A grease filter can be subject to damage within the lifespan of a range vent hood. This damage can manifest in the form of punctures, scrapes, nicks, tears, and erosion to the material that can allow external grease to slip into the range vent hood and gunk up its inner workings. A grease filter might become damaged from general wear and tear or due to a collision with a hard object that warps the component beyond functionality. If this occurs, the grease filter should be removed and replaced with this genuine OEM replacement part. It is a simple replacement process that will require no special tools.This is an OEM part sourced directly from the manufacturer. It is sold individually. This grease filter is compatible with the following appliance brands: Bosch and Thermador.

The Lamp Holder is an OEM part for Bosch range hoods. It secures interior lighting fixtures in place above the stovetop, managing connecting wires neatly out of the way. Proper holder positioning ensures consistent task illumination.

Causes of failure can include normal wear from sustained vibration in the kitchen environment. Periodic replacement preserves essential visibility above the cooktop.

Symptoms of a faulty lamp holder are:

• Interior hood light failing to illuminate or flickering inconsistently
• Visible damage or deterioration of mounting clips/anchors
• Loosening of lighting unit from repeated cleaning

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.