Duane December 20, 2017 for Model Number PLES389DCD When I turn the oven on, only the broil comes on and gives me an f1 error code. Air continually blows out a vent above the oven door. What could be the problem?
1 Answer Hello Duane, As per the tech sheet, this can be caused by any of the following conditions: 1. Shorted keypad. 2. Control's internal checksum may have become corrupted. 3. Control has sensed a potential runaway oven condition. Control may have shorted relay, RTD sensor probe may have gone bad. To correct the issue it is recommended to Check RTD sensor probe and replace if necessary. If the oven is overheating, disconnect power. If oven continues to check the oven sensor and replace if necessary. The oven sensor should have a resistance of 1090 ohms at 77 degrees and would add 2 ohms for every 1 degree of temperature increase. If the oven is overheating, disconnect power. If oven continues to overheat when the power is reapplied, replace EOC. Severe overheating may require the entire oven to be replaced, should damage be extensive. Read More...
Miguel July 14, 2017 for Model Number Cpes389ac1 I have a oven Frigidaire cpes398ac1. The display work except the top and the bottom element. I checked the elements and there fine. Do I need to change the board/time? Thanks
1 Answer Miguel, With both the bake and broil not working then this issue will be a faulty control board and would need to be replaced. Read More...
Steve February 05, 2017 for Model Number PLES389DCB All of the burners work. However, the display is blank and I cannot activate the clock or set the oven. Is it the control panel?
Francisco M. January 06, 2017 for Model Number PLES389DCB My clock display does not light up. I changed the panel with the numbers and it still does not work. The oven does not work, the burners do work. Do I need to change the clock display board?
1 Answer Hello Francisco, You will need to order the control 316272204 for the model provided. This should solve the issue. Read More...
Sharon October 23, 2015 I have a Frigidaire Professional Series stove the model # is PLES389DCC..one side of the control panel doesn't work ..the numbers 1,4,7 and clear off are in a row and don't work ..the rest does ..Can you tell me what I need to do?
1 Answer Hello Sharon. You will need to order and replace the control panel 318239700 on the unit. Read More...
Rika April 21, 2012 for Model Number PLES389DCC My oven only beeps and flashes the F1 ERR when I try to turn it on. Do I need to replace the entire control panel AP3563513?
1 Answer Hello Rika! The F1 error indicates an electronic oven control failure. You will need to replace the ERC, part number 316272204. Thanks! Read More...
Mario G. January 17, 2012 for Model Number cpes389cc2 I have this model of oven. The electonic board is burn. I am not sure wich part number order to replace. The oven do not heat any more the top is ok. Could you help? I stay in Canada, do you ship here? Thanks.
1 Answer Hello Mario! Unfortunately, we do not have any information available for model cpes389cc2, this model is considered an international appliance. We also are unable to ship outside of the US at this time. Sorry about that! Read More...
Jesse R. January 10, 2012 for Model Number CPES389DC3 How do I get access to change the clock control?
1 Answer Hello Jesse. Remove the knobs from the unit and remove the nuts under the knobs. Then the front display panel will lift upward and off the unit. Now you can access and replace the clock 316272204. Hope this helps. Read More...
Captdale November 11, 2011 for Model Number PLES5389DCE I've replaced the electronic display panel with new part number AP3586271 and this did not resolve my problem. My question is what else could be causing the display to function and light up or turn the oven on. Here are my symptoms. My oven does not work but the stove top does. There are no lights on the display at all except for the left and right stove top indicator lights. No clock display and oven will not turn on even by pressing any of the buttons on the panel. I would like to know if replaceing the clock/time part# AP 3563513 will fix my proplem.
1 Answer Hi Captdale. Is your model # PLES389DCE ?, (missing number 5 you inserted?). There is a clock/timer part # 316272204, that will control all you mentioned. Thank You. Read More...