Steven October 17, 2011 for Model Number LTF6700FSO The washer will not come on when start button is pushed. All lights are on and you can select settings as normal. When you push the start button it will flash pause and nothing happens. You can push the cancle button and everything will clear but when you push start, about 3 seconds later it shows pause and nothing happens.
1 Answer Hello Steven. Check and see if the door is locking on the unit. If not, you will need to test for power coming to the lock when start is pressed. If there is power there and the unit does not lock, replace the door lock assembly 131763256. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Chery September 09, 2011 for Model Number atf600fso When I plug in my washer the lights blink and it beeps would that be the electrical board.
1 Answer Hi Chery. Is the tub fully drained? If not then you need to clean the pump. Are you over soaping? You need to access the tech. diagnostic sheet in the inside top or sides of the cabinet. Put the machine in a field test mode to bring up any Error codes that you can supply us. Thank you. Read More...