Dora B January 31, 2015 for Model Number LGBD2432LQOA Water doesn't drain. We checked the pump and it works, but water is left in bottom of washer. Could it be in the timer? Or somewhere in control panel? Thank you.
1 Answer Dora, You will want to check the flapper on the drain to ensure that it is in place properly. Also check to make sure that the drain line goes up to a 32" loop before going into the drain line. Or if it is attached to a air gap then make sure that the air gap is not clogged. If this checks ok then the issue will be caused by a faulty control board. Read More...
Fred February 04, 2014 for Model Number bbbd2432kfo Dishwasher fills with water but does not complete the washing cycle. The timer works, but dishwasher never start, but it does go to drying part. the dishes of course are not washed.
1 Answer Hello Fred. Test and see if there is power going to the dishwasher motor. If there is power there, and the motor does not run, then replace the motor on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Donald P. October 10, 2012 for Model Number FGBD2432KW1 Does the control board 154752801 have the timer built into it?
1 Answer Hello Donald! The control 807024601 is the board that controls the functions of the unit. Thanks! Read More...