Frigidaire Dishwasher Control Board

The User Interface Control Button Assembly is an OEM part for Frigidaire dishwashers. This component is essential for the seamless operation of the dishwasher, allowing users to interact directly with the appliance by selecting wash cycles, starting operations, and adjusting settings. The assembly includes a set of buttons that are connected to the electronic control board, ensuring that inputs are accurately registered and executed. 

Causes of a failing User Interface Control Button Assembly include prolonged usage leading to wear and tear on the buttons, accidental spills or moisture that can damage the electronics, and potential wiring issues that affect signal transmission.

Symptoms of a malfunctioning User Interface Control Button Assembly include:

• Buttons failing to respond when pressed
• Random activation of functions or cycles
• Display issues or error messages indicating communication problems

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models, ensuring extended usability across multiple appliance brands.

The Dishwasher Control Board is an OEM part for Frigidaire dishwashers. It operates as the central "brain" of the dishwasher, controlling functions like cycle selections, wash and rinse levels, heating elements, and input/output sensors.

Causes can be circuitry failures, moisture damage over time, or physical stresses from vibration.

Symptoms of a bad control board include:

• Cycle failure or inability to start or complete washing
• Temperature or input/output sensor malfunctions
• Fault codes appearing or strange appliance behavior
• Unresponsive buttons or input failures

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Main Control Board is an OEM part for Frigidaire dishwashers. It serves as the central hub that manages and directs all the dishwasher's functions, including cycle selection, timing, and operation of various components like the pump and motor.

Causes of a bad control board can include electrical surges, moisture exposure, or general wear and tear. These factors can lead to failures in the electronic components or connections within the board.

Symptoms of a bad Main Control Board include:

• The dishwasher not starting or completing cycles
• Error codes displayed on the control panel
• Inconsistent or malfunctioning cycle operations
• The dishwasher becoming unresponsive to control inputs

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Main Control Board is an OEM part for Frigidaire dishwashers. This essential component acts as the central nervous system for the appliance, orchestrating all its functions and operations. It regulates the washing cycles, water temperature, drying phases, and more, ensuring that your dishwasher runs smoothly and efficiently. 

Causes of damage to the main control board can range from electrical surges that fry the electronics, to moisture exposure leading to corrosion or short circuits, and even normal wear and tear over time. 

Symptoms of a bad Main Control Board in a dishwasher include:

• The dishwasher failing to start or complete cycles.
• Erratic behavior such as stopping mid-cycle, not draining, or failing to heat the water.
• Displaying error codes that indicate issues with the system's control or electronic components.
• The buttons or controls not responding correctly, or the dishwasher behaving unpredictably.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Electronic Control Board is an OEM replacement part designed for Frigidaire dishwashers. It houses the integrated circuitry that monitors and directs all functions of the dishwasher like temperature, cycles, sensors, and component operation.

Symptoms of a bad electronic control board include:

• Cycles failing to start or not advancing properly
• Lights and displays not illuminating or responding as expected
• Inconsistent or no heat during the drying part of cycles
• Unusual noises or vibrations coming from internal components

Causes of a bad board can be moisture exposure damaging circuits, power surges disrupting chip performance, or natural component degradation over extended use.

This OEM Frigidaire control board is also compatible with models produced under the Electrolux, Gibson, Kelvinator, and Kenmore brands.

The Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It contains a touchpad and electronic controls that operate wash cycles and drying features.

Causes of a faulty switch assembly can involve water exposure inside the door control area leading to circuitry corrosion over time.

Symptoms of a bad switch assembly include:

• Inability to select or advance through wash cycles
• Failure to heat water or activate the pump
• Erratic or stuck temperature readings
• Unresponsive buttons

This OEM Frigidaire replacement part is also compatible with dishwashers manufactured by Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Dishwasher Control Board is an OEM part for Frigidaire dishwashers. It is the central component responsible for operating and controlling all functions of the dishwasher. 

Causes of a bad control board can include moisture damage, short circuits, or normal aging of electronic parts over time. 

Symptoms of a bad control board include:

• The dishwasher not starting or functioning properly
• Lights flashing in unintended patterns  
• Inability to select desired wash cycles
• Issues with dispensing detergent or rinse aid

This OEM Frigidaire replacement control board provides genuine functionality and performance. It is also compatible with some Electrolux, Gibson, and Kenmore dishwashers.

The Control Board is an OEM component specifically designed for Frigidaire dishwashers. It houses electronic components that direct machine operation through programmed cycles.

Causes of a faulty control board typically include failure of integrated circuits or microchips over time handling electrical signals. Damage from power surges is also possible. 

Symptoms of a bad control board include:

• No response to selector buttons  
• Inability to start or complete wash cycles
• Fault codes or blinking lights indicating errors  
• Intermittent or unusual mechanical behaviors

This OEM part fits Electrolux, Gibson and Kenmore models as well.

This electronic control board governs the dishwasher's cycles and overall operation. Replacing a failed board can restore proper cycle selection, start-up, and progress so the appliance runs reliably again. What it does

• Orchestrates cycle timing and switching of internal components
• Processes inputs from sensors and the door switch to manage operations
• Communicates with the user interface/console and status indicators
• Failure symptoms include: won't start, unresponsive controls, cycles that pause or won't advance, random beeping, or error codes

• One electronic control board

• Disconnect power at the breaker before servicing; verify no power is present
• Use ESD precautions; handle the board by the edges only
• Photograph/label connectors and transfer them one at a time to the new board without forcing pins
• Inspect wiring and the door switch/harness for damage before reassembly and testing

The User Interface is an OEM part for Frigidaire dishwashers. As the user interface, it allows users to select cycles, options, and monitor dishwasher status.

Causes may be due to wear and tear over time, water damage, or shock/impact. This OEM Frigidaire part replaces the entire control panel assembly to restore full functionality.

Symptoms of a bad user interface include:

• Unresponsive or nonfunctional buttons
• Blank or dead display screen
• Inability to select cycles or options
• Erratic operation and unexpected behavior

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This switch assembly is used in select dishwashers to provide a precise open/closed electrical signal to the control. Replacing a worn or sticking switch helps restore consistent cycle operation and reliable responses from the affected function. What it does:

• Sends an on/off (open/closed) signal to the control for the related mechanism in your model
• Helps ensure the connected function engages only at the correct time
• Common symptoms of a failed switch can include: cycle won't start, intermittent stopping, or improper filling/draining behavior
• A sticking or heat-damaged switch may cause erratic operation or error alerts

• One switch assembly

• Disconnect power (and water supply if required by access) before servicing
• Access location is model-specific; photograph wiring and note terminal positions before removal
• Transfer or reuse existing mounting hardware as applicable; ensure firm terminal connections
• After install, check switch actuation and run a test cycle to normal operation

The Control Board is an OEM replacement part for Frigidaire dishwashers. Located inside the cabinet behind the control panel, the control board utilizes integrated circuits and electronic components to regulate all dishwasher functions. It receives input signals from the control buttons to initiate and monitor the wash cycle. 

Causes of a bad control board can include failures of electronic components over time, voltage fluctuations that cause circuit damage, or moisture infiltration leading to corrosion.

Symptoms of a bad Control Board include:

• Dishwasher fails to start or stops mid-cycle unexpectedly
• Lights or displays on control panel malfunction  
• Inability to select options or cycles
• Complete non-responsiveness of control functions

This board is also compatible with some Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

Restore your dishwasher's brains with this control assembly. It manages cycle selection and timing so the machine responds to commands, starts reliably, and completes wash cycles without random beeps, stalls, or unresponsive controls.

• Coordinates cycle logic and component operation
• Interprets button/touch inputs from the console
• Drives status indicators or display on applicable models
• Typical symptoms: controls unresponsive, won't start, lights flicker or beep erratically, cycle won't advance

• Disconnect power at the breaker before servicing
• Use anti-static precautions; handle the board by its edges and avoid touching contacts
• Label/photograph wiring; move connectors one at a time and fully seat any ribbon cables/locks
• Reuse existing mounting hardware; ensure correct orientation and secure harness routing before reassembly

This electronic control is the refrigerator's main control board that manages temperature, user display, and timed functions to restore reliable operation. Replaces a failed control to return the unit to normal cycle and user control. What it does:

• Regulates compressor, fans, and defrost cycles based on sensor inputs
• Powers and responds to the front control/display panel for temperature and mode settings
• Controls timed functions such as automatic defrost and ice maker cycles
• Resolves symptoms like unresponsive controls, incorrect temperatures, or intermittent cooling behaviors

• One electronic control (main control board)

• Disconnect power to the appliance before starting any work
• Handle the board by its edges and avoid touching components; discharge static by grounding yourself
• Reassemble panels and secure all connectors; restore power and run a function test

This electronic control board replaces the oven's main control module to restore user interface and timed bake/clock functions. It provides the control logic that manages heating cycles and display feedback for the range. What it does:

• Serves as the oven's primary control module, interpreting commands from the touchpad or knobs
• Controls bake/broil elements, timers, and display outputs through relay/signaling circuits
• Common symptoms: blank or unresponsive display, no heat or heating cycles won't start, or controls do not respond
• Replaces a failed or intermittent board that causes erratic oven behavior

• One electronic control board assembly

• Disconnect power at the breaker before beginning service to avoid shock or injury
• Handle the board carefully and avoid touching connector pins or components; static discharge can damage electronics
• Verify wire harness orientation and secure all connectors before restoring power.