Tina December 11, 2013 for Model Number plgfz390eca This was converted to lp and now I need to convert back to natural gas.
1 Answer Tina, to convert your unit back to NG you'll need one igniter/orifice assy for the 16k burner part number 316430500, one orifice for the 5k burner part number 316237903, one orifice for the 12k burner part number 316237901 and two orifices for the 9.5k burners part number 316237902. Thanks! Read More...
Tms December 10, 2013 for Model Number plgfz390eca I am trying to convert from lp to natural gas.. What parts would I need?
1 Answer Hello! You'll need two 9.5k burner orifices part number 316237902, one 12k burner orifice part number 316237901, one 5k burner orifice part number 316237903, and one 16k orifice assy part number 316430500. Thanks! Read More...
Paul December 09, 2013 for Model Number FGF337BCE I want to convert my LP stove back to natural gas. what do I need and do I have to do anything to the regulator? Thank you, Paul
1 Answer Paul, To convert your range back to Nat gas you will need the top burner orifices. The part numbers are for the left and right rear and left front 316237901, and for the right front 316237902. You will also need to loosen the oven orifices approximately 1 1/2 to 2 turns and open the air shutters. You would also need to flip the regulator cap from LP to NAT. Read More...
Wally November 26, 2013 for Model Number CRG3150LWE On my brand new oven range, after doing conversion from Natural Gas to LP Gas using CRLP3 with its instructions, top burners work fine but oven burner makes very large, orange, sooty flames that shoot up into bottom of oven box making it smell gassy and sooty inside the oven and in our house.
1 Answer Hello Wally. You must adjust the oven orifices and the air shutters until the flames are blue in the unit. Read More...
1 Answer Hello John, Depending on the last character of your model number, you will either need GRLP3 or GRLP4. Read More...
Scott November 24, 2013 for Model Number lggf3043kf Are there actual orifices in the oven itself? I changed the 5 on the stove fine.I get a strong propane smell coming from the bottom of the stove ,but no leaks on the line or connections.Help
1 Answer Scott, When converting to LP you will need to tighten the orifices in the oven and close the air shutters. The air shutters may need to be reopened a little to get the blue flame requires. If you do not tighten the orifice and flip the cap on the regulator then there will be a propane smell. Read More...
Lori November 24, 2013 for Model Number FFGF3047LSF I need to convert my gas stove to propane, what kit do I need?
1 Answer Lori, the LP conversion kit needed for your model is part number GRLP3. Thanks! Read More...
Gene November 05, 2013 for Model Number fridgeadare gas range fggf3054kbc This was converted to lp and now I need it converted back to natural gas. What do I need?
1 Answer Gene, you'll need the NG orifices. For the 17K burner use part number 316527509, 5K burner use part number 316527504, 14K burner use part number 316527513, left front 9.5K burner use part number 316527500, and for the middle 9.5k burner use part number 316237902. Thanks! Read More...
Ldaffiduck October 28, 2013 for Model Number FGF366CQC Stove is currently set up for LP, I need to convert it to natural gas. What parts do I need?
1 Answer Ldaffiduck, For the bake and broil you will need to turn the orifices 1 1/2 to 2 turns out and open the air shutters. The regulator will need to have the cap flipped from LP to Nat. For the top surface burners you will need to replace the orifices. For the left rear 316237902, right front 316237900, right rear 316237902 and left front 316237902. Read More...