Bryan December 16, 2011 for Model Number FGF326ASD I need a conversion kit to switch this stove from LP, back to Natural Gas. Is there one, or what are the part numbers I need to order? Thanks!!
1 Answer Hello Bryan. Based on the model number you provided, you will need to order 4 orifices 316237902. Also the oven will need to be adjusted, and the regulator needs to be flipped over. Hope this helps. Read More...
Eileen November 23, 2011 for Model Number Model # PLGF390DCB This range was converted to LP gas and now want to switch it back to natural gas. What conversion kit part #s do I need? Thanks
1 Answer Hello Eileen. You will need to order all new orifices 316237902, 316237901, 316430500, and 316237903. Hope this helps. Read More...
John October 31, 2011 for Model Number CEW30GF6GSE Looking for Propane Conversion Kit for Electrolux CEW30GF6GSE Gas Range sold by Sears.
1 Answer Hello John! Unfortunately, the model CEW30GF6GSE is unable to be converted to LP. The manufacture states in the installation guide to not convert this appliance it is only set up to use with natural gas. Sorry about that! Read More...
Lane October 10, 2011 for Model Number LFGF3014LW Frigidaire Range Is this the correct kit to convert to LP gas?
1 Answer Hello Lane. Yes, based on the model number you provided, GRLP3 is the correct LP kit. Thanks. Read More...
D.S. September 21, 2011 for Model Number Whirlpool SF325PEEZO What do I need to order to convert my stove from propane back to natural gas?
1 Answer Hello D.S. You will need to order all 4 burner valves 3196848, 3196847 X2, and 3196849. Also, you will need to flip the regulator back to natural gas, and adjust the orifice on the gas safety valve for the oven. If there valve gives problems, you will need to replace the valve and regulator assembly 3196544. Hope this helps. Read More...
Gail July 18, 2011 for Model Number Figidaire Range #FGF375EQA This range was converted to LP gas and now want to switch it back to natural gas. What conversion kit part #s do I need? Thanks
1 Answer Hello Gail, to convert this model number you will need to order part number 316237805 quantity two, one each of part # 316237704 and 316272000. The oven parts will be adjustable, thanks! Read More...
Sam July 12, 2011 for Model Number plgfz390eca The stove was converted to propane and I want to convert it back to gas. What pieces will I need and is there instructions for the process?
1 Answer Hello Sam! You will need to replace the orifices on the unit to switch back to NG. You will need a qty of 1 each of the following parts; 16K burner orifice assembly 316430500, 5K orifice 316237903, 12K orifice 316237901, and 9.5K orifice 316237902. The oven is self convertible. You will need to locate the existing regulator and remove the converter cap. Remove the pin in the converter cap. Rotate the pin and snap pin firmly into place. Reinstall converter cap. Thanks! Read More...
Stan July 11, 2011 for Model Number FGF386GSA Yes, I saw those parts. It appears the NG>LP kit includes 21 spuds (if the photo is to be taken literally) for just over $1 each, while the REVERSION spuds are more than $21 each! Anyone else out there think this is outrageous? A kindly Electrolux engineer gave me the drill-out specs for natural gas, for those able to do it correctly: 14K is .078", 9.5K is .061", and 5K is .043". I didn't get the oven orifice data, am asking if it is adjustable or also needs drilling?
1 Answer Hello Stan! For the oven, there is no orifice needed. You will need to located the existing regulator and remove the converter cap. Remove the pin in the converter cap. Rotate the pin and snap pin firmly into place. Reinstall converter cap. Hope this information helps you! Read More...
Stan July 09, 2011 for Model Number FGF368GSA Just bought a used stove and it is set for propane. I want to convert it back to natural gas but cannot find any listings for revert kit. Original owner of course has no clue where manual or NG parts are. Maybe someone who has converted to LP can offer theirs.
1 Answer Hello Stan! You will need to replace the top burner orifices to conver the appliance back to natural gas. You will need two 9.5k burner orifices 316237902, one 14K burner orifice 316237900 and one 5k burner orifice 316237903. Thanks! Read More...
Gary S. June 29, 2011 for Model Number ffgf3015lw This is a new frigidaire range I need the part # for the conversion kit natural gas to lp gas[conversion from natural to propane] if you need the serial number i will get it for you. Thanks for your help! Gary.
1 Answer Hello Gary. To convert this unit from Natural Gas to L.P you will want to order part number GRLP3. This should come with all the parts needed to convert the unit. Thanks! Read More...