Charles April 20, 2021 for Model Number AP4356466/ The burner model number. I replaced my burners that I ordered and cleaned the pans. The burners do not lay flat. What do I need to do? They do lay flat without the pans inserted, just not secure. Thanks!
1 Answer Hello Charles, sometimes with new top burner elements this can happen. Turn off power to the stove, remove one of the elements and remove the receptacle mounting screw, using a pair of needlenose pliers bend the receptacle mounting bracket support slightly, a little at a time, till the receptacle allows the burner to sit flat. Read More...
1 Answer Sandra, As long as the element is completely dry you should be able to use the element. Read More...
Itjustbeme November 13, 2019 for Model Number Avanti ER24P3SG I have a small 24" Avanti electric range in an apartment. It has 3 6" burner elements and 1 8". I need to replace a 6" one (240V 1250W). I don't think this has any goofy proprietary connector. Are all 6" elements essentially the same? There's a few on your site at varying price points (of which I'm not super concerned as they are inexpensive) but I just want to make sure they will work. I'm pretty sure these things are standardized but just want to verify.
1 Answer Sorry but we don't have resources to cross-reference Avanti parts, I would refer you to the manufacturer. It is possible that one of the elements we have would work but no resources to confirm. Read More...
Judy January 24, 2019 MY 6" heating element for my Frigidaire cooktop still works but the brace that is attached to it has come off. Do I need to replace the element?
1 Answer Judy, For this issue the 6" element would need to be replaced to get the bracket for the element. Read More...
Louis C. November 09, 2018 What is the voltage and wattage rating for the 318372210 - 6-inch element?
1 Answer Hello Louis, The element requires 220Vac to 240Vac to heat properly. I'm sorry but the manufacturer does not list the wattage of this element. We could figure the wattage with ohms law if we had the model number from the units' I.D. tag as long as the resistance is listed on the tech sheet. Thank you for your patience and understanding in this matter. Read More...
1 Answer Hello Louis, This is a 240Vac part. If we had the model number of the appliance it is for, we might be able to determine the wattage but without it, I'm sorry but we have no way to determine the wattage. Thank you for your patience and understanding in this matter. Read More...
Donald C April 07, 2018 for Model Number rfg 533 We have an insert stove top/oven which is probably 30 years old and the 8" burner sometimes work ok and other times gets to hot at lower settings.
1 Answer Donald, This issue would most likely be caused by a faulty infinite switch 5303935092. Read More...
Hildey March 13, 2018 for Model Number Parts # AP4356966,#3163782219. 1 each I am wondering what the shipping time would be to Randle WA please. If it is ordered Wed morning would it get there by Saturday, thank you
1 Answer Hildey, Here is the link to the shipping page and the timeframes for each category. http://www.appliancepartspros.com/customerservice/shipping.aspx Read More...
Sue January 08, 2018 for Model Number J47701WH Do you have a replacement stove top electric burner (Small) for the old GE Stove model J47701WH? Thank you!
1 Answer Hello Sue, the right front burner and left rear burner comes up as part number WB30X342. Thanks! Read More...
Brenda December 19, 2017 for Model Number FEF3015LSM The burner on the left front does not work, this has caused the rest of the burners not to work. It is like a fuse blew on the stove. However, if I turn the other burners on the clock restarts. If I replace the burner will it fix my problem ? Do I have a RESET BUTTON on the stove any where?
1 Answer Brenda, There would not be a reset button on the unit. You would want to check the power supply coming to the unit to make sure that there is 240 vac and check the infinite switches to make sure that they are good. Read More...