Donna June 14, 2012 for Model Number TEF361GSA My large right front heating element will not turn off. Do I need to replace the switch or the burner?
1 Answer Hello Donna, First check for and wiring shorted to ground. This can bypass the switch and keep the element energized all the time. If no shorts, the next suspect is the infinite switch 316436001. If the element were at fault, most times it won't come on at all. Be sure when you change the part to remove one wire and place it on the new part. Remove the next wire and place it on the new part, and so on. This will prevent you having to chase the wiring for the new part installation and simplify your repair. Read More...
Theresa June 09, 2012 for Model Number fef352aua I need to replace the surface element switch. Is #54 the right one for my stove?
1 Answer Hello Theresa! Yes, item 54 and 54A will be the correct item to purchase to replace the surface element switch. For the small element switch use part number 316436000 and for the large element switch use part number 316436001. Thanks! Read More...
Malcolm May 23, 2012 for Model Number 79090939601 Kenmore Electric Range The large eye, front left burner continues to get hot, no matter what setting. Is this the part for the regulation of heat to that burner? Surface Element Switch - 240 volt, 1250-1500 watt, 5.2-6.25 amp, 8 inch surface element switch. Item Number: AP3890378 Manufacturer's Number: 316436000 Made by Frigidaire Read more: http://www.appliancepartspros.com/Appliance-Parts/frigidaire-surface-element-switch-item-number-ap3890378.aspx#ixzz1vmdDbOhV http://www.appliancepartspros.com
Rock March 18, 2012 for Model Number TEF351EWF Back element, burned out, sparked, burned through element, light would not go out,replaced electric receptacle, thing under hood,bought new element, still not working,and light will not go out.Anything else that should be checked ?
1 Answer HI Rock. You will need to replace the infinite switch part # 316436000. Thank You. Read More...
Panda August 05, 2011 for Model Number fefl79fcb I have to replace switch # 54 and I removed all wires without making a note this switct p# ap3890378 has different connetors then original. Please give me advise which wire goes to which connector. Thank you
1 Answer Hi Panda. Behind the control panel or in behind the storage drawer is the wiring diagram to the Unit. It is folded in a plastic clear sleeve so you can see it. You can also follow the connections already on other switches existing. All of the information I have does not give color coded wiring. Thank you. Read More...
Will March 08, 2011 Part # 54 switch for gibson burner, 6 inch. Is this the right p/n ap3890378? You have two items listed as 54 on the parts list.
1 Answer Hello Will! 316436000 will be the correct part number for the 6" burner switch. If you need the 8" burner switch order 316436001. Hope this helps! Read More...