David June 05, 2021 for Model Number FES367DCD Would it be possible to use your switch number 318120521 for the replacement of the small burner (left front) switch on Fridgidaire FES367DCD? It appears to be the same configuration as part #318220080. Is there really any significance to the different wattage or amperage ranges between the 2 different switches used?
1 Answer David, it would be recommended that the switch 903136-9010 is used with the model provided as per the manufacturer's operational design. The switch 318120521 has been discontinued and is no longer available. Read More...
Ray July 02, 2019 for Model Number FES367DQA I have been looking for a "how to" video to replace the burner switch on this Frigidaire model. The nobs are on the front and all videos are for stoves with the nobs on the top... so all you have to do is remove the back panel..... HELP!.
1 Answer Ray, with the power disconnected, you will need to remove all of the knobs. From there, you will find retaining nuts on each switch, these will need to be removed as they hold the glass interface to the panel assembly. From there, there will be four screws that hold the main control frame to the console that will need to be removed as well as two screws that hold the switch that needs to be changed out. Once these screws are removed, this will give you access to change the switch out. Read More...
Patrick October 28, 2015 for Model Number FES367DSA The diagram shows all burner switches are item #54; however, when I look at the old switches, only one of them has this part number and is built this way, while the other three have a different part number(s) 318220080 and 318220081 and their internals are different. Will this switch work for all four replacements?
1 Answer Hello Patrick. Based on the model number you provided, 318120521 should work on all 4 elements. Read More...
James Rand December 30, 2011 for Model Number PLES389DCB SER# NF 34710717 Order from diagram part 54A, picture shows 8 contacts, my stove has 7 contacts connected with leads. Your company sent part # 318191027, this part does not have any contacts for leads S1 and S2. Basically not the correct part because I would have two leads that I can not connect. The diagram part appears to be correct, but the part shipped does not match. What do I do now ? What is the correct switch part no. replacement ??
1 Answer James, Could this be the switch you need 318191023 ? It has seven(7) terminals, is a "dual infinite" switch and is listed on the prts diagram for the model number you supplied. Which burner do you need the switch for (RF,LF,RR, etc.) Thanks and Good Luck Read More...
Ben November 11, 2011 for Model Number FED300DSA How to remove the control panel facing so I may replace the control switch?
1 Answer Hi Ben. Remove the power. Then the knobs. Then the control stem nuts. Place all of this in a row so you can reinstall them. Then you can loft the front fascia off the control panel mount assy. This will give access to inner mount panel. There will be outer face screws ( 2-top) and (2-bottom) to remove that will allow back of the infinite switch area/ wires. Reverse reassembly. Infinite switch part # 318120521. Thank You. Read More...
Danny June 15, 2011 for Model Number PLCS389DCB The control knobs(PN 54) are beginning to wiggle, is there a way to tighten them or do I have to replace them.
1 Answer Hello Danny. If the switch is loose, you will need to replace the switch 318120521. They can not be tightened down. Hope this helps. Read More...