Rbw March 04, 2012 for Model Number ffu2064dw9 I have had this unit for 4 years now. Three times it has stopped cooling. I emptied everything before items defrosted and the next day the unit was working again. What could I replace to solve this problem? thank you,
1 Answer Hello Rbw. If the unit is getting stuck in the defrost cycle, then you will need to replace the timer 5304518034. If the timer is good, and it is not in defrost cycle, then you may have a bad temperature control 5304513033. Hopr this helps. Read More...
Henley January 16, 2012 for Model Number FFU17FC4CWO Why does ice form in the bottom of my freezer and then will melt and run out at the bottom of the door.We cleaned out the ice but it has formed again. This model was supposed to be self-defrosting, but I do not have a drain or pan underneath. When the freezer defrosts where is the water supposed to go?
1 Answer Hello Henley. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/refrigerator-freezer-repair/173916-kenmore-top-mount-refrig-h2o-build-up.html Read More...
D Thompson November 28, 2011 for Model Number ffu2of9cw2 I asked the previous question about the condensation, I negelected to indicate that enough forms that it is pooling on the floor underneath the compressor.
1 Answer Hello D Thompson. You will need to get a HVAC technician to check the level of freon in the unit. You may have a restriction or overcharge in the sealed system. Hope this helps. Read More...
D Thompson November 28, 2011 for Model Number ffu2of9cw2 I have condensation forming on an insulated copper line from the compressor, it doesnt form all the time, could a defrost timer cause this? Thanks,
1 Answer Hello D. Thompson. No, this is a slight overcharge of freon causing the frosting. As long as it clears off the line and does not freeze solid, it should be fine. Hope this helps. Read More...
Jeff June 26, 2011 for Model Number 253.9287412 My temperature gradually got warmer and warmer. I must have a leak. What is the best way to check for leaks and how can I recharge with r134a refrigerant?
1 Answer Hi Jeff. If your refrigerator is running (and considering your question), then if you think you have a leak in refrigerant, you will need a qualified service technician to diagnose and estimate your repair. You can use the yellow pages to find a local repairman. Thank-you. Read More...
Jeff June 15, 2011 for Model Number 253.9287412 High temp alarm is going off. Food stays frozen, except ice cream and the bottom shelf. Door seal is good,I replaced defrost timer and thermostat. Still I get the high temp alarm. Cold air is coming out. What else might it be???
1 Answer Hello Jeff. Check and make sure the coils are clean, and the evaporator fan motor [5304442620] is running properly. Hope this helps. Read More...
Kelly May 28, 2011 for Model Number MFU17F3GW6 Freezer does not stop running. It gets to about 0 degrees no matter where you put the temp setting, but does not shut off.
1 Answer Hello Kelly. The first thing you may want to try is cleaning your coils on the back or bottom of your refrigerator. If this does not help, this issue is typically indicitive of a failed thermostat. This part can be tested with a multi-meter MA-DM1. I will include a link to an article detailing how to use a multimeter to test various parts in this message. I hope this info helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Sandra May 27, 2011 for Model Number 25321041103 My freezer no longer sucks the door closed and it seems to be defrosting a bit. We used to have to pull hard to open the door and now nothing. The seal looks alright, what do you think the problem is?
1 Answer Hello Sandra! If the door is not sealing properly the door gasket will need to be replaced. Your part number is 5304507199. Thanks. Read More...
Moe May 15, 2011 for Model Number 253.23424101 The knob on the AP2113785 defrost timer, is it a ajustment? It will turn one way but not the other way. It has markings and I turned it a small amount to get the compressor to turn on. Help! Thanks Moe.
1 Answer Hello Moe. It is not an adjustment, it advances the timer 5304518034 to defrost mode. If the timer is sticking, it will need to be replaced. Hope this helps. Read More...