Frigidaire Refrigerator Control Board

The Defrost Timer is an OEM part for Frigidaire refrigerators. It is an essential electronic component that controls the automated defrost cycle of the refrigerator. The defrost timer monitors run times and temperatures to determine when to initiate the defrost process. It allows the refrigerator to operate efficiently by preventing excessive ice buildup. This defrost timer is designed to run for 30 minutes every 8 hours. 

Symptoms of a bad defrost timer include: 

• Inability to initiate or maintain the defrost cycle 
• Excessive ice buildup in the freezer compartment
• Erratic temperature fluctuations
• The refrigerator running excessively or displaying other performance issues

Causes of a bad defrost timer can be normal wear and tear over time. Environmental factors like power surges or fluctuations may also impact the electronic timer functionality. 

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Whirlpool Defrost Timer is an OEM replacement part for Whirlpool refrigerators. The defrost timer regulates the automatic defrost cycle, which prevents ice buildup on the evaporator coils in the freezer compartment by sending a signal to the defrost heater to turn on and melt any ice buildup on the coils. 

Causes of a bad defrost timer can include mechanical wear over time, electrical failures, or internal component damage. Prolonged usage and voltage spikes can also affect the timer's functionality.

Symptoms of a bad Defrost Timer include:

• Excessive frost buildup in the freezer compartment
• The refrigerator or freezer not maintaining the set temperatures
• Unusual noises coming from the appliance 
• The appliance running continuously without cycling off

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Defrost Timer is an OEM replacement part for Frigidaire upright freezers. It serves as a crucial component responsible for regulating automatic defrost cycles.

Causes of a faulty defrost timer relate to 20,000+ hours of constant exposure to freezer temperatures as low as -10 degrees Fahrenheit. Such extremes can compromise electrical switching mechanisms over prolonged usage periods.

Symptoms of a failed defrost timer include:

• Inability to initiate automatic defrost modes  
• Excessive ice and frost accumulation inside cabinet
• Warm areas detected due to impaired fan circulation
• Diagnostic codes indicating defrosting problems

This genuine Frigidaire replacement part is compatible with Kelvinator and some Kenmore units as well.

The User Interface is an OEM part for Frigidaire refrigerators. This component allows users to adjust temperature settings, control the water and ice dispenser, and access the refrigerator's various features and diagnostics. 

Causes of a malfunctioning User Interface can range from electrical issues, such as short circuits or power surges, to physical damage, like cracks or wear from frequent use. 

Symptoms indicating the need for a replacement include:

• Inconsistent or non-responsive touchpad inputs
• Dimmed or non-working display lights
• Incorrect temperature readings or failure to adjust settings
• Unexpected behavior or error codes displayed

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Defrost Timer is an OEM replacement part for Frigidaire refrigerators. It is a crucial component that controls the defrost cycle, ensuring proper and efficient defrosting of the freezer compartment.

Symptoms of a bad defrost timer:

• Excessive ice buildup in the freezer compartment
• Freezer not maintaining the desired temperature
• Water leaks or moisture accumulation due to improper defrosting
• Refrigerator running constantly or cycling too frequently

Causes of a defective defrost timer can include mechanical wear and tear, electrical malfunctions, or simply reaching the end of its lifespan due to regular use.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The User Interface is an OEM part for Frigidaire refrigerators. This control panel allows users to select and adjust settings, monitor the refrigerator’s status, and receive feedback on its operation. The user interface is crucial for managing various functions such as temperature control, ice and water dispensing, and other customizable settings.

You should replace the user interface if it becomes unresponsive or damaged. Causes of a bad user interface can include regular wear and tear from frequent use, exposure to moisture or electrical surges, or physical damage from impacts or mishandling. These issues can lead to the control panel malfunctioning or becoming completely unresponsive.

Symptoms of a bad user interface include:

• Buttons or touch controls not responding
• Display not showing correctly or remaining blank
• Inconsistent or incorrect temperature readings
• Error codes or malfunction messages appearing frequently

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Electronic Control with Cover is an OEM part for Frigidaire refrigerators. It manages and regulates the various functions of the refrigerator, including temperature control, defrost cycles, and compressor operation. The cover protects the electronic components from dust and moisture, ensuring reliable performance.

Causes of a bad electronic control can include electrical surges, wear and tear over time, or exposure to moisture or dust. Faulty wiring or connections can also lead to malfunction.

Symptoms of a bad electronic control include:

• Inconsistent temperature regulation
• Refrigerator not cooling properly
• Unresponsive control panel
• Frequent cycling on and off
• Error codes displayed on the control panel

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Control Board is an OEM replacement part for Frigidaire refrigerators. This component serves as the brain of the appliance, managing and coordinating various functions such as temperature control, defrost cycles, and the operation of fans and compressors. A functional control board ensures the refrigerator maintains optimal performance and energy efficiency.

Control boards can fail due to power surges, electrical issues, or normal wear over time. A malfunctioning board can disrupt the refrigerator's functionality and impact its ability to preserve food effectively.

Symptoms of a bad control board include:

• Inconsistent or incorrect temperatures in the refrigerator or freezer
• Unresponsive controls or display panel issues
• The refrigerator not cooling or running continuously
• Error codes or unusual noises during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator Dispenser User Interface Control Board is an OEM part for Frigidaire refrigerators. This control board operates the refrigerator dispenser functions by directing the release of ice and water during dispensing operations.

Causes of a bad control board include normal component failure over time due to heavy usage, exposure to moisture, or electrical malfunctions in its control circuitry.

Symptoms of a bad control board include:

• Ice or water dispenser not operating properly
• Dispenser panel lights or buttons not working correctly
• Issues with selecting crushed & cubed ice
• Inability to dispense ice or water at all

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Defrost Timer is an OEM replacement part for Frigidaire refrigerators. Located within the control housing inside the fresh food section, it controls the defrost cycles to clear frost from the evaporator coils.

Causes of timer malfunction include: cracking/fatigue of plastics from extended usage; breakdown of delicate electronic components over many years of operation; and failures inhibiting regulated defrost intervals.

Symptoms of a failed defrost timer include:

• Refrigerator fails to automatically initiate scheduled defrost periods
• Frost/ice builds up excessively on evaporator coils obstructing airflow
• Erratic refrigerator temperatures as heat exchange degrades
• Refrigerator stuck in the defrost cycle
• Compressor is not running

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore ranges.

The Dispenser Control Board is an OEM part for Frigidaire refrigerators. It is located behind the control panel of the refrigerator and communicates with other components to activate the dispenser mechanisms. It enables the user to select and dispense ice or water as desired.

Causes of a faulty dispenser control board can include electrical malfunctions, component failure, or improper handling. These factors can result in issues such as the dispenser not responding to user input, incorrect dispensing amounts, or complete failure of the dispenser functions.

Symptoms of a bad dispenser control board may include:

• Inability to dispense ice or water
• Incorrect dispensing amounts or inconsistent operation
• Error codes or flashing lights on the dispenser panel

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Defrost Timer is an OEM part for Frigidaire refrigerators. It regulates the automatic defrost cycle of the freezer, preventing the buildup of frost and ice on the evaporator coils.

A bad defrost timer can be caused by electrical issues, component failure, or malfunctioning mechanisms. When the timer becomes faulty, it can result in issues such as excessive frost buildup, poor cooling performance, or a constantly running compressor.

Symptoms of a bad defrost timer include:

• Frost or ice accumulation in the freezer
• Inadequate cooling in the refrigerator 
• Constantly running compressor 

Replace your faulty defrost timer with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The User Interface is an OEM replacement part for Frigidaire refrigerators. It is the digital control panel that allows for monitoring temperature settings and adjusting other functions.

Symptoms of a bad user interface include:

• Frozen or unresponsive touch buttons  
• Illegible or blank LED screen
• Inability to power on or adjust refrigerator settings
• Temperature display showing incorrect readings

Causes of a bad user interface can include failures in the electronic components from condensation or liquid spills over time. Physical damage to the wiring or circuit boards is another potential cause.

This part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Note: This part is often misdiagnosed and requires electrical testing using a volt/ohm meter.

Important: When replacing this main board, if it does not power on or make a connection, you will also have to replace the display board. The display boards for some models are no longer available. Please refer to your specific model for the correct display board and availability.
 

The PC Board is an OEM replacement part for Frigidaire refrigerators. As the central "brain" of the refrigerator, it controls all electronic functions and directs operational tasks. The board receives input from sensors and buttons to orchestrate temperature regulation, defrost cycles, lighting, and more.

Causes of a bad PC board can include failure over time due to heat exposure, power surges damaging sensitive electronic chips, or liquid ingress corroding circuitry.

Symptoms of a bad PC board include:

• The refrigerator failing to cool or fluctuating temperatures
• Lights not turning on or functionality issues with buttons/displays
• Abnormal mechanical noises or failure to engage components

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Main Power Control Board is an OEM replacement part for Frigidaire refrigerators. It is the central processing unit that controls all electrical functions and components within the refrigerator. The board receives input signals, processes them, and sends output signals to regulate temperature, monitor sensors, power accessories, and run diagnostics.

Symptoms of a bad main power control board include:

• Fluctuating or inconsistent temperatures  
• Components not functioning properly
• Error codes appearing
• Intermittent or complete power failures

Causes of failure can include moisture damage, power surges, component degradation over time, or physical damage.

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.