Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Washer Agitator Assembly by Ge

Best Seller
Manufacturer Part
4.89 (64)
By: Ge
Part Number: OEM11895474
Manufacturer Part Number: WH43X10034

Fix a washer that won't agitate or has broken fins. This agitator assembly snaps in place in under 5 minutes. Simple DIY repair, no tools required.

More
$61.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart

Questions & Answers

For Ge Washer Agitator Assembly (Part Number: OEM11895474)

1 Answer

Hello Lee. If the coupler fits tight into the agitator, then the agitator is fine. You will need to replace the transmission if so.

Read More...

1 Answer

Hello Ann. You will need to check for bad suspension rods on the unit. Also, make sure the dampening straps are good.

Read More...

1 Answer

Hello Chuckie,
This is most likely caused by broken or stressed "clips" that are made on the bottom of the agitator that retain the agitator to the coupler. I would have provided the correct part number but could not since no model number for the unit was provided.

Read More...

1 Answer

Hello Baby Girl,
I'm sorry but the manufacturer has set it up so the coupler and the agitator have to be ordered separately.

Read More...

1 Answer

Joanne,

Yes you would want to remove the agitator and clean underneath of it. Also if you use a liquid fabric softener the residue from left over fabric softener will cause this type of issue.

Read More...

1 Answer

Kevin,

Yes the lid switch could definitely be an issue with the unit not agitating or spinning. You will want to check the lid switch and also check the magnet on the lid to make sure that it is not damaged. You could also remove the front panel of the unit and check the light that is on the board located on the motor. It would flash in a sequence and based on the sequence would be a error code. If you get the tech sheet out of the control panel it will tell you what the sequence means.

Read More...

1 Answer

Dianne,

The agitator not turning could be a lid switch issue if the unit is not spinning also. It could be a transmission issue. If the motor is running and agitator is not turning then the transmission would most likely be the issue.

Read More...

1 Answer

Hello Tammy. Yes, the old agitator pulls off and the new agitator presses onto the coupling.

Read More...

1 Answer

Hello Beatriz. Sorry, the agitator does not separate in this model to take out the lint filter.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google