Martha March 19, 2020 for Model Number PDT750SSF1SS I have power and every button works on the panel, except start. The start button doesn't seem to engage the unit at all, like it died. All other buttons work and even chime when pressed. Thoughts?
1 Answer Martha, based on the information provided, the start button in the user interface WD21X22074 is not closing contacts when pressed. This would indicate that the user interface would need to be replaced. However, it would be recommended that the latch WD21X10490 is tested for continuity from pin 1 to pin 2, then from pin 1 to pin 3 while the door is closed. If the latch does not have continuity, it can prevent the unit from starting. Read More...
Ronald February 17, 2019 for Model Number PDT750SSF0SS The chrome trim on the edge of the top of the door is loose at one end. I think it is broken and won't stay attached at that end. I would expect that this is a part of the WD34X24296. Can it buy this chrome part without buying the console cover assembly? If I purchase the whole assembly, how hard is it to replace this part?
1 Answer Ronald, The part that would be needed would be the console cover and button trees kit part number WD34X24296 and would need to remove the inner door panel and console to replace this. Read More...
Charlie August 06, 2017 for Model Number PDT750SSF1SS My dishwasher has power to it but the buttons are not responding. LED screen shows error code " A 18:12". Any suggestions as to what the problem is? How does the door come off so I can take a look inside?
1 Answer Hello Charlie, If you have removed the kickpanel and opened the power connection box to make sure no wire nuts are loose or burned, open the door and remove the screws around the perimeter of the door to remove the liner. This will provide access to the inside of the door for testing. Read More...
Joe C November 09, 2015 for Model Number PDT750SSF1SS I have a GE PDT750SSF1SS dishwasher. I need to replace the Bezel & Cvr Console Asm WD34X20221 but in order to do that looks like i need to slide down the WD34X20470 door. How to I get the door to slide down? I did remove the two screws at the bottom and applied some pressure to get it to slide down but no go. HELP Thanks
1 Answer Hello Joe. Remove the screws around the inner door panel. The you should be able to access the console. Read More...