Kim January 24, 2015 for Model Number JGSP44BEYBB I have a GE Profile range that has been converted to propane and I want to convert it back to natural gas. Can you tell me what conversion kit I need to do that?
1 Answer Kim, You would need to have the following orifices. Small orifice part number WB28K141, medium spud most likely need 2 WB28K5095, and large spud WB28K5096. The oven you would need to loosen the orifice 1 1/2 to 2 turns and flip the regulator cap from LP to Nat. Read More...
Kevin January 18, 2015 for Model Number RGB745WEH3WW I have a RGB745WEH3WW Hotpoint and I am looking to convert from LP to Natural Gas and I cannot seem to find the orifices, I have the correct drill sizes for them but no part number.
1 Answer Kevin, to obtain the NG orifices you'll need to purchase the orifice holders part numbers WB28K10189, WB28K10190, WB28K10187 and WB28K10188. Thanks. Read More...
Melanie January 08, 2015 for Model Number RGB745WEH9WW I need to convert this range and oven from LP (propane) to natural gas so that our daughter can use it in her house. Which parts do we need to complete this conversion? Thanks.
1 Answer Melanie, to convert the cooktop back to NG you'll need the orifice holder part numbers WB28K10189, WB28K10190, WB28K10187, and WB28K10188. The oven orifices are adjustable, flip the regulator back to NG. Thanks. Read More...
Peter December 01, 2014 for Model Number JGBS23DEM3WW I have GE gas range that is set up for LP gas. Now I need to converted to Natural Gas. I know I need 4 orifices. I am not sure about the oven, what do I need?
1 Answer Peter, to convert back to NG you'll need part numbers WB28K10187, WB28K10188, WB28K10189, and WB28K10190. The oven is adjustable. Flip the regulator back to NG. Thanks. Read More...
Showme November 30, 2014 for Model Number 790785 series kenmore range Installed the stove 3 years ago, installer set it up for propane, now we have natural gas available. I want to convert stove back to Natural Gas, but I do not have the original orifices for the burners. Help ?
1 Answer Showme, The model number listed is not a complete model and we would need a complete model to be able to assist properly. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
John November 17, 2014 for Model Number JGB280DEN2BB Need kit to convert GE profile range from LP gas back to Natural gas.
1 Answer John, To convert the unit back to natural gas you will need the following orifices Medium Qty 2 WB28K10023, Large qty 1 WB28K10032, and small for right rear WB28K10031. You would also need to loosen the bake and broil orifices approximately 1 1/2 turns and close off the air shutter about a 1/4 of the way. Flip the regulator cap to Natural. Read More...
Alex September 30, 2014 for Model Number RGB745BEH9WH Looking for a kit to convert GE Hotpoint range from LP back to natural gas.
1 Answer Alex, you'll need the orifice holders to convert the unit back to NG. You'll need one of each of the following parts, WB28K10187, WB28K10188, WB28K10189, and WB28K10190. Flip the regulator back to NG and adjust the oven orifices. Thanks. Read More...
Bill August 25, 2014 for Model Number 79074032310 Need the orifice for the right front burner on my gas range. converting from natural gas to propane. This is the highest output burner. Can I order just one, or do I need to buy the whole kit? Where can I get this?
1 Answer Bill, Unfortunately the orifice that are in the LP conversion kit do not come separately and you would need to order the complete kit which is part number 316542403. Read More...
Jake July 23, 2014 for Model Number JGB280DEN3WW I have a GE stove that is set up for lp. I have the conversion kit to natural, but I don't know which burner they go on. I also don't have the book for it. Can you tell me where they go?
1 Answer Jake, The left rear and left front burner will take a Natural orifice for 9500 btu which would have a 124 stamped on it. The Right front burner is set for 12,000 btu which would have number 168 stamped on it. And the right rear is 5000 btu and would have number 104 stamped on it. Read More...
Sharma February 06, 2014 for Model Number GE gas Range stove JGBP35WEV3WW I'm trying to buy a conversion kit from NG to LP. Can you please help me find what conversion kit I need.. I"m having a hard time matching that model number?
1 Answer Sharma, the manufacturer does not offer a conversion kit. You'll need to purchase the orifices. You'll need one small burner LP orifice part number WB28K144, one large burner LP orifice part number WB28K146, and two medium burner LP orifices part number WB28K145. Thanks! Read More...