J Blake P June 10, 2020 for Model Number Jtp45wow1ww Is there a video to replace the hinges on this model? Thank you.
1 Answer Blake, Unfortunately, there is no video showing how to replace the hinges on this unit. To do so though, you would need to unscrew the wall oven from the cabinet and slide it out. You will need to remove the door and unscrew the hinge so that you can pull it out from the side. You can then install the new hinge. Read More...
Bill June 09, 2016 Hi. I cannot find GE part number WB10K5016 left hinge for wall oven. Is there a cross referenced part number that will work? Thanks
1 Answer Hello Bill. Sorry, WB10K5016 has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part. Read More...
Kevin December 04, 2013 for Model Number JTP14WV2WW My model # has 11 digits, JTP14WOV2WW if I omit the seventh digit I get a "valid" ID so am using it. Why the difference? I need to replace my left hinge can you provide instructions please?
1 Answer Hello Kevin. DOOR HINGE REPLACEMENT - 1. Open the door to the broil position and lift door off by firmly grasping on each side and pulling straight UP. Release both hinge arms. 2. Remove 4 screws that mount the oven to the wall and slide the oven forward about six inches. 3. Remove 2 alignment screws from the side and 2 hinge mounting screws from the front frame. 4. Rotate the bottom of the hinge back and up so hinge arm will go through the opening in the front frame. 5. Reinstall in the reverse order. Read More...
Carol November 03, 2013 What part # for the right side oven door hinge for a GE Profile JTP17WV do I order?
Shelly November 26, 2011 for Model Number JTP27WW Hi, for my 30 inch wall oven, what the difference between ordering a Hinge Assembly Lt. and the oven door hinge rt?
1 Answer Hello Shelly. WB10K5015 is the right side hinge and WB10K5016 is the left side hinge. Hope this helps. Read More...
1 Answer Hello Gerald. open door to first stop and lift door off by firmly grasping on each side and pulling straight up. Be careful not to let the hinge arms snap back on your fingers. Remove four screws mounting oven in the wall and slide the oven forward about 6 inches. Make sure the oven does not fall out of the wall. Remove the 2 lower side trim screws and the 2 screws that mount the hinge to the front frame. Grasp the hinge from the rear and rotate bottom of the hinge torwards the rear of the oven and guide the hinge arm through the slot in the frame. Reinstall in reverse order. Hope this helps. Read More...