Jose August 30, 2020 for Model Number TFX25PR General Electric Hi, I own a refrigerator TFX25PR General Electric Profile. And inside I found this number, 162D65065066077, It's white with some silver details. I need to replace the Knob and the part that controls the knob because it is broken, Do you know the ref of that part that holds the knob? Thank you
1 Answer Jose', based on the partial model number and the part information you did supply, your issue is with the dispenser control assembly. The WR2X8723/WR2X8723 Knob and it attaches to the WR55X129/WR55X129 Dispenser Control Board on the slide control switches. Unfortunately, the WR55X129 dispenser control board is no longer available from the manufacturer. you may want to contact local parts dealers, one of them might still have it in stock. Enter your part number in a search engine, a smaller company might have it. Try eBay, Amazon, or similar sites. Search by using the manufacturers part numberTry a used appliance store, sometimes they have the same model or usable part for your machine. Contact refurbishing companies, especially for circuit boards: [www.circuitboardmedics.com] or [www.corecentricsolutions.com]. Thanks, Read More...
Howard May 25, 2020 for Model Number ZISW42DYA I need part AP2060393 (water dispenser knob) in WHITE. DOI you have one? Thanks
Connie November 13, 2019 for Model Number 363 9550972 The knob broke off of my water/ice dispenser, but the slide arm still works. What part do I need?
1 Answer Connie, The WR2X8723/WR2X8723 Knob(chrome) are the only knobs available at this time, you may need to order two (to match). Hopefully, the control board levers are intact and not broken or damaged, and the new knob(s) will slide on and remain on the levers, otherwise, you would need the control board WR55X129/WR55X129 Refrigerator dispenser control board. The control board is no longer available from the manufacturer. Read More...
Mary January 18, 2015 for Model Number TFH24PRSABB The knob broke off the water dispenser but the slide arm is working. Can I replace just the knob? How do I take the assembly off to do it?
1 Answer Mary, The dispenser knob for the selector is WR2X8723 and is just a push on knob. Read More...
Terry November 13, 2014 for Model Number TPH21PRSABB How do you remove the frame around the ice and water dispenser to replace the selector slide arm?
1 Answer Terry, It is not necessary to remove the trim around the dispenser. You just need to pull the display panel to release it then you can see where the selector knob goes into place. Read More...
Stuart February 22, 2014 for Model Number GE Profile PT1225FMARBS The water/ice knob broke off. The knob part # is WR2X8723. Is the black plastic slider arm (which selects water, crushed ice, or ice) that part of the control board available? Or do I need to purchase a whole control module? Thanks!
1 Answer Hello Stuart! Yes, the slider arms are available only with the control board part number WR55X129. Thanks! Read More...
Rick October 30, 2013 for Model Number tfx25zpzbaa Regarding the two knobs that work your icemaker and water on the door that fit over the 2 posts from the control module, are these $13.17 for 2 or each? I need both
1 Answer Sami, To change the dispenser board, there is a cover that has the lettering on it that you just pull off. Once off there will be 4 screws holding the housing in place. You remove the screws and pull out the housing to replace the control board. The knob just slide onto the control board. Read More...
Sherman B. June 23, 2013 for Model Number TPX21BRBA Is this water/ice control knob available in black and what is the shipping for 2 of them? Thanks.
1 Answer Sherman, the knob used on your model is part number WR2X8676. Please see the following link to view the shipping options available Thanks! http://www.appliancepartspros.com/customerservice/shipping.aspx Read More...