Tom August 13, 2020 for Model Number DPGT750GC2PL Hi, I'm having a hard time finding instructions for how to replace the rollers on a GE gas dryer model DPGT750GC2PL. It doesn't seem to open up in the same way as other GE dryers.
1 Answer Tom, to access the rollers, the control panel will need to be removed by taking the 4 screws in the back out. From there, the inverter box will need to be removed and one screw at each corner of the top panel will need to be removed. This will allow the top panel to lift up at the back and slide forward. With the top panel removed, the four screws behind the door on the front panel will need to be unscrewed along with the two screws on top of the front panel. The front panel will then slide slightly forward, allowing the door switch wire connector to be unplugged and the front panel removed. This will give access to the front drum support which can be removed to access the drum and other internal parts. Read More...
Aaron January 03, 2017 for Model Number DPGT750GC2PL Does this assembly come with both rollers and all necessary hardware (clips, washers etc) to install them?