General Electric Dryer Axle, Roller, Pulley Parts

The Idler Pulley is an OEM part for GE dryers. This critical component helps to maintain the correct tension on the dryer's drive belt, ensuring smooth operation and preventing it from slipping. 

Symptoms of a bad Idler Pulley include:

• Squeaking or screeching noises during dryer operation, often a sign of bearing wear or failure.
• The dryer drum not turning smoothly, or at all, indicating that the belt may be slipping or has come off entirely due to a failed pulley.
• Excessive heat or a burning smell, which can occur if the pulley is seizing up and causing friction.
• Visible wear or damage to the pulley itself.

Causes of a bad idler pulley can include worn bearings, accumulation of lint and debris that impedes rotation, or material fatigue after prolonged use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Idler Pulley is an OEM component specifically designed for GE dryers. As part of the drum assembly, the idler pulley helps drive the rotation of the drying drum. It works closely with the belt and motor pulley to spin the drum and tumble clothes during the drying cycle.

Causes of a bad idler pulley can include wear and tear of moving parts over time, loose or worn belts that cause added strain, or damage from sticking or jamming during operation. 

Symptoms of a bad idler pulley include:

• The dryer drum not spinning or tumbling clothes
• Loud grinding or squealing noises coming from inside the dryer 
• The belt slipping off the pulleys
• Vibration or shaking during use

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Idler Bracket and Bearing Assembly is an OEM part for GE dryers. This assembly supports and guides the dryer drum belt, ensuring it remains tensioned and aligned for proper drum rotation during the drying cycle. The idler bracket and bearing play a crucial role in maintaining the efficiency and functionality of the dryer.

Over time, the idler bracket and bearing can wear out or become damaged. Causes of a bad idler bracket and bearing assembly can include frequent use, physical damage, or normal wear and tear of the moving parts.

Symptoms of a bad Idler Bracket and Bearing Assembly include:

• Squeaking or grinding noises during the drying cycle
• The dryer drum not turning smoothly or at all
• Increased drying times or incomplete drying

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This drum support roller assembly is a genuine General Electric part, sold individually. It can be used as a replacement part for a dryer. This drum support roller assembly bolsters the placement of the drum in the cabinet as it rotates through a standard laundry cycle.A drum support roller assembly might have to be ordered as a complete replacement for the drum support rollers of a dryer. The primary symptom of a drum support roller that has to be replaced is a particularly or unusually noisy laundry cycle with squeaks coming from the area of the drum support rollers. If this occurs, perform a visual inspection of the drum support rollers. If there appear to be signs of visible damage including punctures, erosion, or warping to the part as a result of an accident or due to standard wear from long-term usage, the component should be removed and replaced by this genuine OEM replacement part.This is an OEM part sourced directly from the manufacturer. It is sold individually. This drum support roller assembly is compatible with General Electric brand dryers.

This idler pulley keeps tension on the dryer drum belt so the motor can spin the drum smoothly. Replacing a worn pulley can quiet squealing and restore consistent tumbling.

• Maintains proper belt tension so the drum turns under load
• Free-spinning pulley reduces friction and belt wear
• Common symptoms of failure: squealing/chirping noises, drum won't turn, belt slipping or fraying, burning rubber smell
• Helps prevent the belt from jumping off the motor or drum

• Disconnect power; for gas dryers, shut off the gas supply
• Access typically requires removing the top/front panel and releasing belt tension to remove the drum
• Transfer any spacers/retainer from the old pulley to the new one; the pulley spins freely before reassembly
• Route the belt per the model's diagram and check belt alignment/tension before test run

This roller support holds the dryer drum roller in place to help the drum turn smoothly and stay aligned. Replacing a worn support can reduce noise and wobble and help protect the belt and drum from uneven wear. What it does:

• Holds and positions the drum roller so the drum rotates with minimal friction
• Keeps drum alignment and belt tracking stable during operation
• Helps prevent drum wobble and uneven wear that can lead to rubbing or thumping noises
• Common symptoms: loud squealing or grinding, thumping during rotation, visible drum wobble

• Disconnect power to the appliance before starting any repair
• Access typically requires removing the dryer front or rear panel; follow the model's service manual
• Inspect the roller, axle, and adjacent support components; replace any worn parts to prevent repeat failure
• Use proper tools and secure fasteners to factory torque

This motor drive pulley guides the dryer drive belt and helps transfer motor power to the drum for proper rotation. Replacing a worn or damaged pulley restores smooth drum movement and reduces noise. What it does:

• Guides and supports the drive belt so the drum turns evenly
• Maintains belt alignment to prevent slipping or excessive wear
• Reduces squealing or grinding caused by a damaged pulley bearing
• Helps restore normal tumbling when the drum drags or hesitates

• One motor drive pulley

• Disconnect power to the appliance before any service; follow lockout/tagout best practices
• Inspect the drive belt and bearings while replacing the pulley; replace worn belt or bearings as needed
• Typical service requires basic hand tools and access to the dryer cabinet or motor housing

This GE Roller Assembly is an OEM replacement part for GE dryers. It plays a role in the smoothness and efficient operation of the dryer drum.

Roller assemblies can go bad over time due to regular use, accumulation of lint and debris, or mechanical strain. A failing roller assembly might lead to a range of operational issues in the dryer. Identifying and addressing these issues early is crucial to maintaining the appliance's efficiency and prolonging its lifespan.

Symptoms of a bad Roller Assembly include:

• Unusual noises, such as thumping or squeaking, when the dryer is running.
• The dryer drum struggling to rotate smoothly or getting stuck.
• Increased vibration or shaking of the dryer during operation.
• The dryer drum appears misaligned or wobbles during use.

This GE OEM replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This drum roller assembly supports the dryer drum and helps it turn smoothly during cycles, reducing noise and wear. Replaces a worn or noisy roller to restore quieter, more consistent drum rotation. What it does:

• Supports the dryer drum and maintains proper alignment during rotation
• Reduces grinding, squeaking, or thumping noises caused by worn rollers
• Prevents excessive drum wobble that can lead to uneven drying or wear
• Helps bearings and drum seals last longer by maintaining smooth movement

• Disconnect power and gas before starting any repair
• Remove front or rear access panels and drum as required for safe replacement
• Inspect adjacent parts and replace if visibly worn
• Handle small parts carefully and follow OEM instructions for torque and reassembly

This idler spring provides tension for the dryer belt so the drum turns smoothly and evenly. Replacing a worn spring restores proper belt tracking and reduces slipping or noisy operation. What it does:

• Maintains proper tension on the dryer drive belt so the drum rotates correctly
• Keeps the belt aligned on the idler/tensioner pulley and motor pulley
• Prevents belt slippage that can cause the drum to stop or turn intermittently
• Helps reduce squealing, grinding, or rubbing noises from the drive assembly

• Disconnect power to the dryer (unplug or shut off circuit) before starting work.
• Access usually requires removing the dryer front or top panel—refer to your model's service instructions.
• Inspect the belt and idler pulley for wear and replace if damaged while the unit is open.
• Use care when releasing or installing the spring—it is under tension; wear eye protection and gloves.