Al December 30, 2013 for Model Number General Electric: J KP27 OJ5AD I have a double oven in which the selector switch for the top oven has failed. I've been told by my local serviceman that the switch for the 22-year old oven is no longer available. He has given me three switch numbers that he has tried to find: WB32X73; WB22X4131 and WB22X5131. He says he's not been able to find a switch to fit the oven....is there another switch that will work with my unit or is there a place I can still get the switch?
1 Answer Al, Unfortunately the selector switch WB22X5131 has been discontinued by the manufacturer with no replacement available. Read More...
Vinesh B. March 14, 2012 for Model Number GE JP989 Cooktop How I can replace the selector switch AP 2024271. Thanks for your help.
1 Answer Hello Vinesh B. 1. Remove all 7 knobs from the cooktop. Note: Remove any knob clips that remain on the control shafts and reinsert clips inside knob stems. 2. Remove 4 screws and the wiring access cover located below the controls. Disconnect the white 5- pin blower connector inside. 3. Remove 3 screws that hold the component plate to the cooktop. The screws are above the wiring with 2 toward the front and 1 toward the rear. Caution: Save and replace with the exact screws to prevent glass breakage (#8-18 x 1/4-in.). 4. Unplug the 2 red and 2 white connector housings. 5. Lower the control assembly and rotate the front side down to remove. 6. Now you can access and replace the switch WB24X449. Hope this helps. Read More...