Bill April 30, 2020 for Model Number 107rc86-b I think the correct 6" burner is WB30x342 however I have also found a WB50x356 which seems to be the same thing but just comes with a trim ring.Are they interchangable? Thanks
1 Answer Bill, Based on the closet model to yours the WB30X342 is the correct element for your application, however, the other part you have listed is not compatible with your machine. Read More...
Betsy Johnson February 05, 2020 for Model Number GE P7 Range model jmp26002fa I need I large burner and 3 small burners for this stove. The burners are hard wired so need the ceramic insulators that the burners go into. Also need the drip pans that fit. Thanks!
1 Answer Betsy J, Based on the information provided the parts requested are as follows: 6" element WB30X342 8" element [AP2027829 6" pan [AP2634757 8" pan [AP2635055 8" ring [AP2028086 6" ring WB31X5014 Note: elements comes with ceramic block, terminals and screws. Read More...
Benson December 23, 2019 for Model Number J 776002WH Hi...I have a GE combo electric range, and oven...I am looking to replace all four surface elements. I also notice the existing surface elements only have a trim ring and NOT a drip pan. 2 questions: 1. What are the surface element part #'s (small ones and large ones) 2. Can I use drip pans? If so, what are those part numbers as well....thanks!
1 Answer Hello Benson, would you recheck the model number and repost your question as the given model shows as invalid. Read More...
Joel July 22, 2019 for Model Number J403W1 This is for our lovely 4-element GE free-standing range, I think it's early-to-mid-60s. The model badge is a little faded but it seems to read J403W1, We need to replace the drip pans - 2 8" elements, 2 6" elements, hinged-type with 4 connector prongs on each. All the pan-ring combos I've found at stores are too shallow! Can you help me find the right ones?
1 Answer Joel, Based on the model provided the part number for the 6-inch pans is WB32X10012 and the 8-inch pan is part number WB32X10013. If you need the rings as well they are part numbers WB31X5013 and [AP2028086} Read More...
C D June 06, 2019 for Model Number 33902DC I ordered your part numbers WB30x342 and WB 30x341 for a General Electric fifty year old stove. Please tell me how to replace the burners. Do I need to remove the stove top to change the burners? Thank you!
1 Answer CD, Raising or removing the cooktop panel isn't necessary, but makes it a bit easier to work with in, some cases. You do want to make sure you remove power to the range before you do anything. Locate the element retainer screw, along the edge of the burner opening and remove it. Raise and slide the element up and out of the cooktop, until the attachment terminals are accessible, label the wires and remove the screws and wires from the element terminals. Reverse the procedure to install the wires and element, Restore power and test the element(s) for operation. Read More...
Patrick January 09, 2019 for Model Number J43701WH Looking to replace heating elements on a GE J43701WH electric stove. Your 6" element WB30X342 (AP#2027827) appears to have the proper connections. It is listed as delivering 1350W. Wiring diagram for the oven shows that one of the 6" elements delivers 1250W while the other delivers 1425W. Are these elements available or do I need to replace both with the 1350W. Any safety/operational concerns in upping the 1250W to 1350W? Have the same issue with the 8" elements. Your WB30X341 (AP#2634783) delivers 2450W while wiring diagram shows 2050W and 2405W for the existing units. Is that an issue?
1 Answer Patrick, This element would be correct for your unit and will work with no issues. Read More...
Andy October 27, 2018 for Model Number GE JMP 2202AD Looking for 6" heating element for my 30+ year old GE stove. The elements have 2 connectors that plug into socket, It has been suggested that I use WB30X342 but it has 4 connectors that plug into the sockets. Is this a valid solution or is there a better heating element that has 2 connectors. Thanks
1 Answer Andy, For your model the part number for the 6" element will be WB30X342 and the 8" will be WB30X348. Read More...
Ed January 22, 2018 for Model Number jcs560w4wh A few minutes ago you were kind enough to give me the part numbers for the surface elements on this range. In looking at the photos accompanying the part, a four wire configuration is reflected in the photos. The current elements on this range only have two wires encased in the ceramic shields. Is your part a multiple use element for different wiring requirements? Or, possibly the photo is not of the actual part? Just don't want to order the wrong part. Again, thanks.
1 Answer ED, Based on the model number [JCS560W4WH] and your description of the elements, you have the wrong part numbers. The six(6)" surface elements should be WB30X359 / WB30x359, and the eight(8)" surface elements should be WB30X348 / WB30X348. Review the part photos in the AppliancePartsPros.com parts order screen and verify the elements are similar to the ones on your range, then order the parts. The parts are in stock and available at this time. Thanks, Read More...
Ed January 22, 2018 for Model Number jcs560w4wh I would like the correct part numbers for the 6" and 8" surface elements for this stove. Seriel is zl177650g. Thanks.
1 Answer Hello Ed. You need 2 of WB30X348 and 2 of WB30X342 for the correct parts needed. Thank you. Read More...
Sue January 16, 2018 for Model Number J47701wh We purchased WB30x342. Do you have a video on how to install it? Thank you.
1 Answer Hello Sue. Sorry we do not have a video at this time. We are working daily at adding new videos to our site. Read More...