Jim February 23, 2016 for Model Number 795.7130 Lights stuck on and overheating even with door closed.
1 Answer Hello Jim. You will need to replace the main control board and any parts that are melted and damaged on the unit. Light socket assembly will need to be replaced on the unit as well. Read More...
Frank December 29, 2015 for Model Number LFC25776SB Noticed the ice maker is not making ice. Temperature is set to 0°F and when I press and hold the test button, the whole assembly rotates correctly but the ice level arm returns to the "up" position and stays there. Is there a way to reset the arm or does the whole ice maker assembly needs to be replaced?
Steve December 17, 2015 for Model Number Kenmore / LG Ice Maker Assembly Kit AEQ72909603 Possible to purchase just the plastic ice tray to replace a cracked one on my ice maker? Kenmore / LG Ice Maker Assembly Kit AEQ72909603 Thanks.
Kev September 13, 2015 for Model Number LBC22520SW/01 My refrigerator does not run and lights don't turn on when door is open its not that old....What do you think is broke?
1 Answer Hello Kev. It sounds like the main board EBR41531303 is bad and will need to be replaced on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Glenn June 22, 2015 for Model Number 795.71609.010 Ice maker doesn't dump the first 4 cubes and when it fills, the water over fills into the ice bucket. If I clear out the ice cube tray it works for a day then it repeats the same problem.
1 Answer Hello Glenn. It sounds like the icemaker is bad and will need to be replaced on the unit. Read More...
Wendy March 09, 2015 for Model Number Kenmore 795.76204.901 Hi! My Kenmore refrigerator is about 3 years old. Haven't had any problems with it and love it! We moved 18 months ago and the new house did not have ice maker hookup. Finally got the line hooked up today and the ice maker didn't come on for the 15 minutes before I had to leave, so I turned it off to be safe. Is there some sort of priming procedure? We didn't even hear the water running to fill it up. Thanks!
1 Answer Hello Wendy. The icemaker has to get cold enough to cycle. You will need to leave it on. It can take up to 4 hours to harvest any ice. Read More...
Cate August 24, 2014 for Model Number Kenmore 795.7130 The icemaker in my Kenmore Refrigerator 795.7130 is functioning but the tray only fills partially with water. One position, the 5th on the right, doesn't ever fill with water. The others seem to only fill about half way. So it works, but I'm not convinced it is operating efficiently. Any ideas?
1 Answer Cate, Based on your model number and the design of your unit, the issue would most likely be caused by low water pressure which could be from the supply line or from the water valve. Read More...
Peter June 09, 2014 I have a refrigerator french door, it has a problem with ice maker, there is ice in the tray but it cannot rotate automatically. I tried to press the test button, it rotated and refilled water, but it did not repeat rotating. Please help me to fix it! Thank you!!!
1 Answer Hello Peter. Make sure the temp in the freezer is correct. If so, replace the icemaker. Read More...
Michael June 02, 2014 for Model Number LFC25776SW I have read that the Ice Maker part # AEQ72909603 has been superceded or updated many times. Are you selling the updated part (which hopefully won't have the same problems as the older version)? Thanks, Michael
1 Answer Michael, according to the manufacturer site the icemaker assembly part number AEQ72909603 is the original icemaker currently on your unit now. Thanks. Read More...
Matthew June 01, 2014 for Model Number 795.71302.012 I need to replace the ice cube tray for my ice maker. Is the tray available for this unit instead of buying the entire ice maker? The is maker part number from sears is AEQ72909603. The refrigerator is a Kenmore 795.71302.012. Thanks for your help
1 Answer Hello Matthew. No the tray is not available, you must replace the icemaker assembly AEQ72909603. Read More...