Mark January 03, 2022 for Model Number lxf31925st/02 my icemaker leaks water into ice bin then drips onto freezer door. when I turn the ice maker off it stops leaking.
1 Answer Mark, it would be recommended that the ice maker be inspected for cracks in the tray. If there is a crack, the ice maker assembly would need to be replaced. If not, the fill tube would need to be inspected to identify if the water was leaking by the valve AJU74532703. Read More...
Robin January 02, 2022 for Model Number Kenmore Elite 795.71052.012 Ice maker stuck upside down. Won't respond to reset button or unplugging of refrigerator.
1 Answer Robin, The ice maker part number is AEQ73110205. The motor of the unit has probably failed in that position. Read More...
Daniella December 30, 2021 for Model Number Lfxs26973d I need the part number for just the 14 cube ice tray. It cracked. I don't need to replace the whole unit if possible.
1 Answer Daniella, The icemaker tray is not available separately and will need to get the icemaker AEQ73110205. Read More...
Raul November 08, 2021 for Model Number 795.71036.010 I'm in the process of ordering an ice maker (PN:AEQ72910409) and watched your installation video in preparation for the install. I saw the following comment from another viewer: "We replaced our ice maker part # AEQ73110203 yesterday according to your instructions. 20 hours later there is ice in the trays, but the trays have not dropped the ice into the bin, which was the original problem that we bought a new ice maker for!! HELP!!" This is my situation with my current ice maker, after reading this comment I'm hesitant to buy a new ice maker and be in the same situation as the other viewer commented. Is there something else that may be causing the ice not to drop in the bin? Please provide feedback.
1 Answer Hello Raul, check the ice maker is turned on, fresh food doors closed, the ice maker has to reach a temp of 0 deg sensed by the main control board before it starts a harvest cycle, this temp is provided by the blower motor located in the freezer on the left side, it blows freezer temp air through the ducting into the freezer area. Read More...
Fred July 11, 2021 for Model Number lg lfx28979st my model has top and bottom icemaker that will not dump ice will both need replacing
1 Answer Fred, it would be recommended that the freezer temperature is verified with a thermometer to ensure it is reaching less than 0°F as both ice makers will not harvest if they are not at 0°F or lower. Read More...
Scott June 14, 2021 for Model Number LMX28988ST My ice maker stopped dumping ice; it filled with water and froze the water. It just would not dump the ice. So instead of trying to figure out why I replaced the entire ice maker with LG AEQ73110205. It has been 24 hours and it is doing the same thing the old was doing. It fills with water and freezes but does not dump ice. Any help/suggestions would be greatly appreciated. Thanks,
1 Answer Scott, WIth the icemaker not dumping ice, this would most likely be a faulty control board since the icemaker is new. Read More...
Greg June 06, 2021 for Model Number LFX25974SB/05 My ice maker works intermittently. I turn it off and back on and seems ot work for a day or two and repeat the process. Wondering if the sensors are bad? Can one just buy sensors or does the entire ice maker need to be replaced?
1 Answer Greg, if the ice maker section is reaching 0°F, and there is not a broken or bare wire at the door hinge, the most likely failure would indeed be the ice maker AEQ73110210. It would be unlikely that the sensor has failed, rather, it would most likely be the control in the ice maker. Read More...
John March 31, 2021 for Model Number LG LFX31945ST/07 The ice maker on my LG refrigerator, LFX31945ST-ASTCNA7, which may also be LG LFX31945ST/07 jammed and a piece broke off. The original model number on the ice maker is AEQ73110203. I have found that part AEQ72910408 is also the same part but was replaced with AEQ73110205 (diagram number 600A). The problem I have is that the connectors do not match with the ones that are in the ice maker housing. It has one connector with 3 wires and the other has 10 with two of those going to the on/off switch on the assembly. This should be something simple to replace and should not require a repair person to do it. So, then what is the correct assembly to buy or do I need to replace the entire assembly (diagram number 612A)?
1 Answer John, as the original ice maker was part number AEQ73110203, the ice maker AEQ73110203 would be used with your particular unit. Read More...
Jan December 02, 2020 for Model Number 795.71053.011 My ice maker needs replacing. The ice maker makes 12 cubes at a time. I found an ice maker on your site, model AEQ73110205 but it is a 14 cube. Are these interchangeable? Or do you carry the 12 cube also and what would be the part number. Thanks
1 Answer Hello Jan, the manufacturer has substituted ice maker (AEQ73110205) AEQ73110205 for the original ice maker that came with your model. It will fit and work correctly in your model, the original ice maker is no longer available. Read More...