Ken December 20, 2012 for Model Number Lsc26905tt I want to repair the ice maker because it is not making ice . Does ice maker assembly, part 5989JA1005D have the condenser unit, and it is all I require to repair the Ice maker?
1 Answer Hello Ken, The icemakers do not have a condensing unit on it. It uses air movement to freeze the ice and allow the thermistor to get cold enough to cycle. This icemaker 5989JA1005D would be the correct part to use if icemaker is not working. Read More...
Tom November 21, 2012 for Model Number lsc26905tt Hi, I have a LG refrigerator, model LCS26905TT. My water going into the ice tray stops prematurely. It only runs for about 3 or 4 seconds and doesnt fill the tray all the way? I bought a whole new ice tray assembly and still did not solve the problem. Is it my valves at the bottom? I have good water pressure and my filter is not clogged.
1 Answer Hello Tom, The first thing that you want to do is pull the filter out and install the bypass. With bypass in cycle the icemaker and see if it fills all the way. If it does then you need a new filter ADQ72910911. If it doesn't then you would want to replace the water valve 5221JA2006D. Read More...
Al W. September 08, 2012 for Model Number LRSC26925TT Hello. I have an LG side by side refridgerator with the ice maker. The reefer is model # LRSC26925TT. The ice tray is deformed from bending over the last couple of years. It gets stuck in the "dump" position causing the next refill to go in other places besides the tray. Can you tell me what part # I need to fix this? Also, is the whole assembly needing to be replaced or is there a tray replacement. Thank you in advance for your help.
1 Answer Hi Al. It is good to have a couple of these around to replace when needed. Tray,ice part # 3390JA1150A. Thank You. Read More...
Tyrone June 27, 2012 for Model Number LSC26905 The ice tray overfills with ice cubes. I manually switch OFF the ice maker. It must not be sensing that the tray is full. What part should I replace?
1 Answer Hello Tyrone. Make sure the bucket is positioned correctly so the arm makes contact with the ice. If so, and the unit doesnot shut off, you will need to replace the icemaker 5989JA1005D in the unit. Read More...
James February 23, 2012 for Model Number LSC26905SW How do I remove the old part (#AP4440415) to install the new one?
1 Answer Hello James. The ice maker is held on slotted retainers by one screw. Using an inspection mirror should make it easy to locate the screw. Once you remove this screw, the ice maker will slide off of the retainers. You then unplug the wiring and the replacement ice maker will reinstall in the reverse order. Make sure the wiring harness is in the clips which hold it out of the ice makers way to cycle. Sure hope this helped! Read More...
Donnie December 15, 2011 for Model Number LSC27926ST The cube tray over fills and runs into ice bin. I changed the water valve,but that did not help.Will a new ice maker fix it? Thank You.
1 Answer Hello Donnie. Yes, if the water valve is new, and the unit continues to over flow, and the refrigerator is level, you will need to replace the icemaker 5989JA1005D. Hope this helps. Read More...
Carlla September 15, 2011 for Model Number LSC26905SW Answer to your questionis. The ref. side is cooling just fine. The freezer is not doing that good. The ice cream stays pretty soft. And the other frozen dinners I have, are a soft frozen. Thanks
1 Answer Hello Carlla. Is the fan running in the freezer? If not, you will need to replace the fan motor 4681JB1029A. Hope this helps. Read More...
Carlla September 15, 2011 for Model Number LSC26905SW The ice maker has completely stop making ice. Just before it quit, the fan sounded like it was coming out of the unit.
Harold September 13, 2011 for Model Number LSC 26905TT The ice tray is bent out of shape which does NOT allow water to fill properly... It over flows into ice receptacle. Do I need an ice maker assembly part # AP4457301 ? Do I also need an ice maker unit or is this part of the ice maker assembly part just referenced? Or do I just need a new tray to fit the assembly? Thank you, Harold
1 Answer Hello Harold. Based on the information you provided, it sounds like the ice maker assembly 5989JA1005D will need to be replaced. Hope this helps. Read More...
Wes T. August 08, 2011 for Model Number LRSC26941ST I need the metal ice rod that runs threw the ice bin or does the metal rod come included when you buy the ice bin (peferred)?
1 Answer Hello Wes! It seems that the manufacture only offers the auger complete with the ice bin assembly. Your part number is 5075JA1029S. Thanks! Read More...