Bill January 12, 2024 for Model Number LMV2031BD/00 Oven wasn’t heating replaced door switch’s all the controls work light comes on turntable works but no heating found fuse in front of transformer blown tested the 2 thermostats behind control board tested capacitor replaced the diode sill would not heat the magnetron had less than one ohm between the terminals but to ground it had 75 ohms so I replaced the magnetron but still would not heat all controls work
1 Answer Bill, based on the information provided, it sounds like the magnetron relay is not closing and the main control EBR77659113 would need to be replaced. Read More...
Bablu Ratnaparkhi June 07, 2023 for Model Number 72166463500 Glass plate does not rotate. The three wheels are in good shape with no flats. How does it rotate? direct drive or belt and pully ?
1 Answer Bablu Ratnaparkhi, There is a turntable motor that rotates the turntable. You will need to test to see if there is 120 Vac to the motor and if there is proper power then this will be a faulty motor that will need to be replaced. Read More...
Roger March 06, 2023 for Model Number LMC2075ST I have a bad magnatron on my microwave model # LMC2075ST The part number on the magnatron is 2M28621TBGH Like to know if I can use 2M246-01TAG magnatron instead? OR is there another part number I should be searching for?
1 Answer Hello Roger, for your model the manufacturer lists the magnetron as part EAS61382907 EAS61382907, there are no substitute magnetrons listed. Read More...
Brian January 30, 2023 for Model Number LMV2031BD When replacing the Magnetron, is it best to go ahead and replace the diode and capacitor at that time as well?
1 Answer Brian, There is no need to replace the capacitor and diode unless they are faulty. Read More...
Sid January 08, 2022 for Model Number JE1860WH04 Hi there: I have a GE microwave of the model number JE 1860WH04 for which the magnetron (original I believe) burned out. I pulled it out & it says LG Magnetron 2M246, with other boxes on the label stating 050GF, then C06C-380174. I'm not sure if I'm looking this up right but is this part you have listed the correct replacement? It shares the "LG Magnetron 2M246" but the other numbers are different. How important are those other numbers? Are those just serial numbers or are they part of the model number?
1 Answer Sid, Thanks for the question!!! GE calls for part number WB26X32629. This would be the OEM replacement part, no other part is recommended for use. Read More...
Tom February 20, 2021 for Model Number GE microwave/cnvection combo PB What’s the difference (if any) between LG 2M246-050GF and LG 2M246-01TAG magnetrons. Is the 01TAG an acceptable replacement for the 050GF? Thanks for your help.
1 Answer Hello Tom, the manufacturer does not list the 2 magnetrons as being interchangeable or what the differences are. We would need your microwave model number to locate the correct replacement part for your model. Read More...
John April 28, 2020 for Model Number Kenmore 721.85063010 Luke: I have a Kenmore Microwave model XXX.85063010, serial no. 210TA00991, mfg Oct. 2012, installed over range. The unit has power, all displays work. Can enter cooking time. Press start and the display begins countdown. But there is no sound, no heat and the turntable does not turn. Can you advise on likely problem and whether you would have repair parts?
1 Answer Hello John, unfortunately, the manufacturer has not provided any technical/service information on this model, however, the symptom you describe is usually a door/interlock switch problem. If you have a multimeter , unplug power to the microwave, and can access the switches, you can check their operation using the continuity setting. Read More...
Ovo April 05, 2020 for Model Number MS2595CIS/01 Please can I use 2m226 to replace 2m286 lg magnetron
1 Answer Ovo, We are not showing whether these are compatible but it would be based on what the wattage for the microwave is. These most likely will not work in place of one another. Read More...
Vitaly October 11, 2018 for Model Number PVM1790DR1WW Hi, I have been having issues with my oven, and already replaced Magnetron Overheat Sensor TWICE within a few months. I was told that it is due to the magnetron, which is about to fail. I would like to know if it is true and, if yes, what model of magnetron do I need for my appliance? Is LG 2M246 050GF correct part? My specs says LG 2M246 21GT. Please advise. Thanks.
1 Answer Vitaly, you would need part number [WB27X26080] for the magnetron tube. They will start running hot when they are going out, make sure all the fans are running and it is not overheating. Read More...
Virgil January 25, 2018 for Model Number GT4175SPB0 Microwave shot sparks from magnetron prior to not heating and load hum. The magnetron has a hole burned in the emitter so I'll be replacing. There is a burned door side connection on the component mounted above the magnetron to interior top. What is it and how do I test if it needs replacing? Thank you
1 Answer Virgil, This part on the door side would be the guide cover and would be part number 8184278. Read More...