Kiana K December 24, 2016 for Model Number LFC25760TT The plastic assembly that holds the tempered glass and slide assembly for the Optibin crisper drawers is broken on the outer side rails and the drawers do not function properly and this has caused the front cover drawer flaps to break at the outer tabs. The tempered glass is good and the drawers themselves are good. I would like to replace the whole top plastic shelving unit that the drawers slide into and also the drawer front covers but I am not sure what part numbers I need to order.
Pat April 24, 2015 for Model Number LFX25960ST My meat tray broke in back and the support which fits in the shelf bracket on the middle also broke. I think I need a set of 140C Guide assm. rail and 140D tray assm.- meat. My shelf bracket is fine and I think the guide assm. just fits into the shelf bracket. Is that correct? Is there anything else I would need? Thank you for your help.
1 Answer Pat, You are correct in the parts that you would need. You would need 2 of part number 4975JA2028A rails and 1 of the tray part number 3391JA2055A. Read More...
Dave September 14, 2013 for Model Number LFC25760SW Does p/n 4890JD1072A come with the 4 roller assemblies or do they need to be ordered separately? Thank you.
1 Answer Dave, The Tv Cover 3550JJ0009A does not come with the 4 rollers attached and they rollers AHJ72989901 would need to be purchased separately and would require ordering 4. You would also need to order 4 screws 1SZZJA3011B to install the rollers. Read More...
Sharon March 22, 2012 for Model Number LFC25760SB These have all come out from under my drawers 1 by 1....each looks cracked so will need to replace them, but WHERE do they attach? Each one dropped out when I opened a drawer so I know they belong with the drawers somewhere, but I see no place for them to attach!
1 Answer Hi Sharon. We have looked in the service manual. It does not explain any drawer assy. or shelf roller functions and dis assembly process. In looking at the parts view it shows the glass cover-t/v. part # 4890JD1072A that the rollers connect to. Right above the drawers. On the underside of the cover there are areas for each roller to screw on to. There are 1-roller on each outer side. Then there are 2- center areas where the rollers go there. You will need 4- rollers part # AHJ72989901 and 4- screws part # 1SZZJA3011B. Thank You. Read More...
Jim K. December 04, 2011 for Model Number LFC25760ST I am ordering a roller assembly PN#151D = AP5198653 for my LG fridge and am wondering if the assembly is 1 roller and I need to order 4 assemblies or is the assembly = two rollers and I need to order two assemblies.
1 Answer Hello Jim. AHJ72989901 is 1 roller. You will need to order 4 if you need 4. Hope this helps. Read More...