Mary August 17, 2011 for Model Number wm0532HW Washer does not power on and no codes were on previous use. There is power in the outlet. What kind of repair damage am I looking at?
1 Answer Hello Mary. Test and see if there is power coming into and out of the filter assembly 6201EC1006T. If so, test and see if there is power going to the PCB board 6871ER1023R If so, and the board is not sending power out, you will need to replace the PCB board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Ed July 07, 2011 for Model Number WM0642HW Washer powers on, but before it even starts the cycle it makes two knock noises on door switch, and gives a dE code. Is it the door switch, that needs replacing ?
1 Answer Ed, Yes, The "DE" fail code indicates a door lock error. EBF49827801 The door switch assembly and wiring is a great place to start, and is the most likely issue, as long as the door is aligned to the front panel and the latch hook on the door is not loose or broken. Thanks and Good Luck. Read More...