Joann November 11, 2017 for Model Number RFG298AAPN/XAA I bought the water housing assembly DA97-06317A. The problem I now have is the refrig. is built in and there is no clearance room to pull out the refrig without taking the French doors and freezer door off. IF that will even get it. Can I remove the tubing on the new housing and use the existing (old tubing ) with the new housing.? I am afraid to pull it off and break it , if it doesn't come apart.
1 Answer Joann, Yes you can remove the tubing from the existing water filter head and install on the new one. On the head there is a red ring that you pull out and then push on the ring around the tube and pull out on the tubing. Read More...
King54 August 07, 2017 for Model Number RFG297ABRS/XAA I have an older model French door Samsung & the new Da29-00003G will not fit. Will this housing assembly allow me to use the new filters?
1 Answer King, For the model that you listed it shows that the filter DA29-00003G would be correct for this model. If the filter will not fit then the filter housing DA97-06317A should correct the issue. Read More...
Randy July 03, 2017 for Model Number RFG297AARS/XAA My Samsung rfg. doesn't make ice anymore , I have replaced the water valve , no luck ,, I replaced the water filter , no luck , I have tried the reset button , no luck ,, any suggestions would help.. thank you,
1 Answer Hello Randy. If the harvest button on the icemaker does not make the unit cycle, then it sounds like you will need to order and replace the icemaker on the unit. Read More...
Prabin June 07, 2017 for Model Number RF4287HARS/XAA-0000 Hello, I have replaced brand new OEM Water Filter in Samsung Refrigerator and I noticed that water doesn't dispense anymore. I have switched to older filter without any luck. I get water when I remove the water filter. I am curious if water housing is broken and needs to be replaced. Any suggestion?
1 Answer Hello Prabin. Yes, you will need to remove and replace the filter housing on the unit. Read More...
Shini June 03, 2017 for Model Number Samsung Model #RS22HDHPNSR I was trying to change water filter in my fridge .The housing got broken. Probably i did too tight by turning filter to align lock position. Then i tried to take it out and wanted to to align the lock position. While i was taking out the filter it make a big sound .Looks like some locking place is broken. Then i tried to use an other brand new filter it is not fitting or locking
1 Answer Hello Shini. You will need to order and replace the housing assembly DA97-06317A. Read More...
Joseph M. May 24, 2017 I am replacing the double pump water inlet pump, the filter, the fill tube grommet assembly. and I also need to replace the main line that runs from the filter at the back of the icebox, but don't know the name of the line and I don't want to buy the wrong part. do you know the name of this line that I am talking about?
1 Answer Hello Joseph, Since there is no pump on a refrigerator, we really need you to post a new question including the model number from your units' I.D. tag so we can look up and recommend parts that can be guaranteed to work properly on your unit. Thank you for your patience and understanding in this matter. Read More...
Lisa May 16, 2017 for Model Number RF4267HARS/XAA-0000 I have replaced the water filter but water leaks from where the filter turns into the water filter housing. I tried it with another filter and it continues to leak. Does the entire house need to be replaced? Or can I get the piece that the filter screws in to?
1 Answer Lisa, Based on this information the water filter housing would need to be replaced on the unit with there being a leak at the port where the filter turns in. Read More...
Rob M. April 25, 2017 for Model Number RFG298AARS Water is dripping from the water filter housing. I've replaced the filter and the leak continues.
1 Answer Hello Rob, This is most commonly caused by a failing water inlet valve DA97-07695A. Read More...
Mead November 22, 2016 for Model Number Model 401.40483800 This a Kenmore Pro built by Samsung. Part is: Filter housing part# DA97-06317D. I wish to replace the housing but not the tubes. I have taken off the red clips but cannot pull out the tubing. I will keep the tubing in place in the refrigerator. I tried pushing in the tube into the housing but I cannot figure out how to get the tubing out. Please advise. Thank you.
1 Answer Mead, When the red clip is removed you will push on the ring around the tubing and then while pushing pull out on the tube. Read More...
Duke August 06, 2016 for Model Number RFG295AARS/XAA-0000 Is it possible to replace the filter housing without having to replace the tubing as well? i.e. can the the original tubing be used and just connected to the new filter housing?
1 Answer Duke, Yes the original tubing can be attached to the filter housing but it is easier to go ahead and replace the tubing at the same time. Read More...