Rich December 01, 2013 for Model Number JMV9169BAW Microwave runs but nothing heats. How do you test the diod? Checked for continuity have none.
1 Answer Hello Rich. You most likely have a "high voltage" side malfunction. Transformer, diode, magnetron, Capacitor. You will need to be extremely careful if you decide to test the components with a multi meter, Very high residual voltage is present, so make sure you remove power to the microwave and short across the terminals on the capacitor. The magnetron should have a reading of less than 1 ohm resistance across the two terminals, and an "open" circuit between each terminal and chassis ground. The diode/rectifyer should have a resistance reading in one direction only, no reistance, or resistance in both directions indicate a faulry diode. The primary winding on the trans former should read approximately 450 Ohms resistance, the secondary wonding should read 80 ohms resitance, and the filament transformer should read 100 ohms resistance. If all the readings are proper and in range, replace the magnetron. Read More...
Alex January 26, 2013 for Model Number jvm1851cd, i think I believe I have a blown magnetron and diode. The critical parts list gives sec # DE59-40001A / ge # WB27X0944. But the cross reference doesnt show my model number. Is this 'assy' a diode? Is it the one I need?
1 Answer Alex, according to your model number the magnetron is part number WB27X10735 and the diode assy is part number WB27X1160. Thanks! Read More...
Matheos January 12, 2013 When I look for a Samsung microwave diode, Part Number: AP4220289 MFG Part Number: DE59-40001A, it tells me that the following part has replaced it. Part Number: AP4236698 MFG Part Number: DE91-70063D see http://www.appliancepartspros.com/samsung-assy-de91-70063d-ap4236698.html can I use that instead? Thanks. matheos
1 Answer Hello Matheos, The diode part number DE91-70063D is the direct replacement for the part number DE59-40001A so it will work for your unit. Read More...
Greg October 13, 2012 for Model Number MMV4203Ds00 Microwave will heat up water in a bowl but won't heat food. What could be the cause
1 Answer Greg, A microwave oven, either heats or doesn't heat, it has no way to distinguish between a bowl of water and aTV Dinner. You do want to check and make sure the turtable tray rotates, this helps distribute the waves through out the food product. You'll also need to check the stirrer blade W10250840 and DE71-60121A stirrer cover(in the top of the oven cavity). The blade pivots on a point in the center of the cover, and has to move freely in order to distribute the microwaves throughout the cavity, otherwise the beam will be directed straight down and will only heat the center of the food product. Read More...