Leo May 28, 2019 for Model Number RF28HMEDBSR/AA The ice maker is working but splits out the ice cubes but lodges on the side and continues to build up with cubes. I have to chip away the cubes but a few days later the same thing happens. Would it be the ice maker or something else?
1 Answer Hello Leo, This is an issue with the water inlet valve which is in the water filter case assembly DA82-02869A. Read More...
Larry February 08, 2019 for Model Number Samsung RF28HMEDBSR/AA I am thinking about replacing the ice maker in this unit as it hasn't worked in months. It doesn't make ice at all. I have done the power defrost a couple of times and it hasn't helped. My concern is buying the new ice maker if that's not really the problem, and it is actually the water valve or something. Is their a way to tell if another part may be the problem? We get water through the door without any issues, but is the water that goes to the ice maker from a different valve? Please let me know if there is a way to check if that part is working properly.
1 Answer Larry, if there is ice build up forming in the ice bin, then you have an air leak that can most certainly cause the icemaker to not function properly. If there is ice build up, you will want to remove the icemaker and ensure that the water inlet tube has not frozen closed. From there, you will want to use [DA81-05595A] to seal the inside of the ice bin section and install the slip assembly [DA82-02367A]. If you press the reset button on the side of the icemaker while it is plugged in, the icemaker should go into a forced harvest. You will then be able to test for 120VAC at the valve going to the icemaker. If the icemaker does not send voltage, then you would need to replace the icemaker. If the valve does get 120VAC towards the end of the harvest and it doesn't fill the icemaker, then you would need to replace the valve. Read More...
Luther January 30, 2019 DA97-12317A. Why do the cubes stick together in 2's and won't fall over the side?
1 Answer Luther, the ice maker can call for too much water causing it to make cubes that are too large. This could explain why they won't drop into the bin. Another thing that could cause an issue is if the ice maker section is accumulating frost throughout the bin. If frost is accumulating along the ice maker, this is an indication of an air leak between the bin cabin and the wall. As far as the cubes coming as two's, when they are in the tray there is only a small separator that makes it so the cubes break apart either as they are being harvested or as they drop into the ice bin. They will not always completely separate, but they should still drop into the ice bin. Read More...
Adam January 20, 2019 for Model Number RF32FMQDBSR/AA Is ice maker ( DA97-15217D) the most updated "revised" ice make that Samsung has released to "fix" the ice maker freezing issue? Also, what's the most updated PN for the motor/auger to fix the freezing issue? Thank You
1 Answer Adam,Part # DA97-15217D per Samsung is the latest part number and part # DA97-12540G is for the auger. Make sure there's no air gap on the left bottom side of the icebox also. Read More...
Bill C November 17, 2018 for Model Number RF323TEDBWW/AA-0001 I have new Ice maker from you DA97-15217D, Question is what holds unit in compartment ? I see front tab on top and it looks as if that is only tab that holds and it should slid stright out to the front is this correct? any videos on this ice maker remove and replace. Help before I destroy my freg!!!!!!!!! sorry please Help.
1 Answer Bill, You will need to remove the screw from the left side bottom wall of the cover over the wires. Once removed you would then slide the cover forward, once removed disconnect the front wire harness. Remove the screw at the bottom right of icemaker and drop down the bottom of the icemaker. Once dropped down you will then push the tab at the top of the icemaker and slide forward. Once you slide it forward then drop the icemaker down and slide it out. Read More...
Tony October 27, 2018 for Model Number RF263BEAEBC The part number listed does not fit. Explain why, ice maker not making ice and seems to be leaking water under the unit.
1 Answer Tony, For this issue the icemaker leaking water would most likely be caused by the icemaker overfilling with water. This would most likely be caused by a faulty water valve. Read More...
Jeff V September 04, 2018 for Model Number RF25HMEDBSR/AA. Need to replace the ice maker on my Samsung refrigerator model RF25HMEDBSR/AA. Is there a recall on this part? Is the ice maker pC What is the difference between da9715217a and da9715217d? Will I need any other parts when replacing the ice maker such adapters, augers or kits?
1 Answer Jeff, There is no information on a recall for this icemaker and the icemaker that would be needed is DA97-15217D and would not need any other parts. Read More...
Trentd September 04, 2018 for Model Number RF28HDEDBSR/AA I just replaced my icemaker with the DA97-15217D unit but I can only get the ice cubes to drop when I press the reset button. Do you think it is a faulty unit. Bought it from Sears since that's where I bought the fridge.
1 Answer Trent, It sounds like the icemaker is the issue if it will cycle when you push the test button. Read More...
Thomas M. July 24, 2018 for Model Number RF31FMESBSR/AA The refrigerator ice-maker has iced up every month or so since it went out of warranty. The design problems are covered in a few internet threads, as well as in Samsung service bulletins (ASC2015071700 of 7/17/2015 and ASC20170602002 of 5/24/2017.) The 5/17 service bulletin recommends, among other steps, replacing the Ice Maker Assembly DA97-15217A with improved DA97-15217D. As I looked for this part I found what I think is a still newer update, introduced 3/31/2018 as DA97-15217E. Is Samsung Ice Maker Assembly DA97-15217E the correct part for our RF31FMESBSR/AA French Door refrigerator? Thanks
1 Answer Hello Thomas, The correct part number for the icemaker in the model provided is DA97-15217D. Read More...
David June 24, 2018 for Model Number rf28hmedbsr Is there a heater that defrosts the ice maker itself? not the heater for the ice tray. The unit is 2 years old. Made ice perfectly for 2 years. Now, every 2 weeks, the unit ices up and stops working. I defrost with a hair dryer and it does it again in 2 weeks. Large chunk at the top and ice on the base.
1 Answer David, On the side of the ice compartment where the wire harness cover is you will need to check to make sure that there is no gap. You can shine a flashlight underneath the left side and see if the light comes through and if there is an air leak you will want to use an RTV sealer to seal it up and this should correct the issue. Read More...