Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Electric Range Control Board Assembly by Samsung

Best Seller
Manufacturer Part
4.89 (64)
By: Samsung
Part Number: OEM17902461
Manufacturer Part Number: DE92-03761B

Oven display blank or temperature not holding? This control board manages heating elements and temperature settings. Moderate DIY, 30-45 minutes.

More
$223.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Questions & Answers

For Samsung Electric Range Control Board Assembly (Part Number: OEM17902461)

1 Answer

Always, you will want to inspect to ensure there is not a loose connection in the wiring from the main control DE92-03761B to the display board DE07-00129A. If there is, it will need to be corrected. From there, the main control would indeed be the most likely issue, unfortunately, the manufacturer does not have a testing procedure for flashing LEDs as described. Since the clock is working properly, there is not an issue with voltage supply, but as the border lights are flashing this is going to indicate either a bridged connection in the display or a communication error at the main control. A communication error is much more likely to occur than a bridged connection.

Read More...

1 Answer

Nelson, it is possible that the control board would be the issue. If you could provide the model number of your appliance in a new inquiry, this will allow for the most accurate information possible.

Read More...
Charlie for Model Number FE710DRS/XAA

Both the convection and conventional oven temperatures do not hold the temperature set. We set the temperature, the oven indicates it has reached the set temp but after 15 minutes if we turn off then turn back on it is showing the temperature is considerably lower and then it slowly returns to the set temperature again. We have verified this with a thermometer. I would assume this is the control board since I would guess both the lower and upper have separate thermo sensors and both have the same problem.

1 Answer

Charlie,

You would want to test the sensors for a resistance of 1090 ohms but does sound likely that the control board would be the issue.

Read More...

1 Answer

Ernielatorre,

The error code that you are getting would be a stuck key and would need to replace the keypad on the unit.

Read More...

1 Answer

Dan,
Per the schematic for this range, this thermostat DE47-20037A has opened up stopping power to control board. This part is normally located on the back of the unit.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google