1 Answer Patsy, The model number listed is not showing as being a good refrigerator model number. To properly assist you we will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
App Tech December 10, 2014 for Model Number Rsg257aars Samsung refrigerator model Rsg257aars does not run and displays 0F 0F will not run. Self diagnostic bring up 88 88. What is wrong with the machine?
1 Answer App Tech, The OF OF is an indicator that the unit is turned to the off position. If you turned back on and it reverts back to this then the issue will be a faulty dispenser control board. To exit this code which is known as sales mode Press Power Freeze & Freezer temp buttons simultaneously for 3 sec ( you will hear a “Ding Dong”) to remove or put into Sales Mode. When in the Sales Mode the Display will show "OF" "OF" . Read More...
Richard W. November 01, 2014 for Model Number RSG257AARS/XAA The ice maker has been giving problems for awhile, randomly not producing ice. In the past, pressing the reset button on the assembly would restore operation again, but now it has stopped doing that. The mechanism appears to be operating fine, because I can see the tines moving. It just will not fill the tray. The water supply solenoid for the ice maker tests fine. Is this an ice maker assy. issue, or is it the main controller board?
1 Answer Hello Richard, If the water valve AJU72992601 is not at fault, the icemaker assembly AEQ36756901 will need to be replaced. Read More...
Mark L September 15, 2014 for Model Number RSG257AAWP/XAA Display has missing parts of numbers and letters and some display icon no longer appear at all. Crushed Ice icon displays fine but when the "ICE TYPE" button is pushed the Cubed Ice icon does not display. Both crushed and cubed ice dispense fine. Also the Child Lockout icon does not display. When the "WATER" button is pushed there is no water icon on the display to indicate the selection. When the Fridge button is pushed the current temperature should be displayed but my display shows "4E" with part of the number four and the number eight missing. I realize it probably means 48 degrees but there is no way to tell for certain. Also the refrigerator door does not seem to readily close on its own any longer. The door may close on its own or it might swing open completely.
1 Answer Hello Mark. Based on the information you provided, you will need to order and replace the dispenser cover DA97-06476F on the unit. Read More...
Esat August 12, 2014 for Model Number RSH1ZTMH1 / xet I have a Samsung side by side refrigerator model RSH1ZTMH1. One day I moved to 20 cm and after I noticed that motor inverter EQ4A5Q non-L2x don'n start. Inverter works if I connect it directly to 220V. On the board of the PBA 220v AC enters and don't exits the current to power the motor. From diode exit continuous 330V. I've tried various sensors but are OK. OLP is also OK. What can it be? Thank you very much.
1 Answer Hello Esat, We will be very happy to assist you if you could please verify the model number from the units' I.D. tag. The one you listed is unfortunately not coming up as valid. This prevents us from being able to see what configuration machine you actually have in your home. Read More...
Richie August 09, 2014 for Model Number rsg257aars Can a faulty display DA41-00522A cause the freezer to defrost and not cool again? Refridge side works but stays alittle higher than 40 degrees. I checked the Inverter and Main control boards. Both have a static red light. Is this good or bad?
1 Answer Hello Richie. If there is a defrost issue with the boards, it is not the display board. It is the main board that will need to be replaced on the unit. Display board does not affect the defrost cycle. Read More...
Jeff July 13, 2014 for Model Number RSG257AAPN/XAA The freezer evap isn't cooling nor is the fan working. No power to the fan either. The refrigerator side seems to be working fine. I've been able to use the test mode to try to force the freezer evap to work but to no effect.
1 Answer Jeff, Based on the issue, it sounds like the issue with the unit is caused by a faulty main control board. Read More...
1 Answer Hello Raul. You will need to test for power from the main board to the compressor start realy on the unit. No power means to replace the main board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Gene August 02, 2013 for Model Number Samsung RSG257AARS Freezer running cool (26F) even though set much colder. I have discovered circulating fan is not turning and no power to fan. Do I need main control board DA41-00524A? Thank You
1 Answer Hello Gene. Yes, if there is no power to the fan motor, you will need to replace the main control board on the unit. Read More...
Haytham July 17, 2013 for Model Number RSG5FUBP I have RSG5FUBP , compressor model ( EQ4A5Q-L2X) stop working . How I can test the compressor without the PC Board DA41-00524A? Also I want to ask what is the cause of failure ?
1 Answer Haytham, To test the compressor windings you would do a resistance check of the pins on the compressor. If you go across the 2 that the relay would go on and read the ohms then go from each of those to the 3rd pin. The ohms reading from the common which is the 3rd pin to each of the other pins, when you add them up they should equal to about the same reading you got across the start and run pins. Read More...