Bcs September 18, 2015 for Model Number dacor erd30s06bk When I turn on the bake or convection bake neither work instead the broiler comes on and stays on. The pure convection works .In the last month I replaced the control membrane and the clock control board but to no avail. I replaced the oven relay board in the last 5 years ,perhaps it went bad again.
1 Answer Hello BCS. Yes, based on the information you provided, it sounds like the relay board is bad and will need to be replaced on the unit. Read More...
Kamlesh M May 22, 2015 for Model Number Dacor ECS130SCH I need a replacement bake element for my wall oven. I can't find my model number on your side. Do you have this part available?
1 Answer Kamlesh, The part number for the oven bake element for your unit is DE81-06277A. Read More...
Paul February 24, 2015 for Model Number Dacor ECS130SCH The oven takes a long time to reach the selected temperature, and once reached does not hold. When pure convection is selected everything works right, as does the boiler. Is my problem the bottom oven element, and if so which element should I buy? Thank you
1 Answer Hello Paul, If the unit operates properly in the convection mode and not in the normal bake, the issue is most likely in the relay board DE81-09179A. Read More...
Ted March 17, 2014 for Model Number Dacor EORD230SCH What is the part number for the bake element on the upper oven of this Dacor unit? The present element is butterfly-shaped. Love doing business with you folks.
1 Answer Ted, the bake element listed for the upper oven is part number DE81-07935A. Thanks. Read More...
Maryann August 23, 2012 for Model Number MCS130S The bake element is not working on my dacor wall oven. What part number do I need to replace and it is fairly easy to replace?
1 Answer Hello maryann. You need to test and see if 120 volts is coming from the relay board to the element and there is 240 volts at the element. If so, replace the element. If not, replace the relay board DE81-09179A in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Tan December 12, 2011 for Model Number ECS130SCH Continued the previous question. Set pre-bake temp at 410 degreeF, and It reached the desired temperature and held on as expected. Reduced to 320 deg and got lost. Raised to 380 deg, and reached the desired temp and held on. Again, the bake element was hot, but NEVER turned glowing red for the entire testing process. Should the bake element turn red when it is hot? Thanks.
1 Answer Hello Tan. Yes, during preheat and baking the element DE81-06277A should turn red and bright red at times. Hope this helps. Read More...
Tan December 09, 2011 for Model Number ECS130SCH for Dacor Ovens Replaced the Bake Element for my Dacor Ovens with the Part# 62637. Will it be glowing red when hot? This Bake Element NEVER turned red when it hot. Is it right?
1 Answer Hi Tan. Can you double check the power supply is proper 240 vac. Check the terminal block and see if it a tight connection. If you have a loose wire at the terminal, it will not allow to heat to come up all the way. Is the terminals on the back of the element on tight? Make sure at one side of the element you have 120 vac to ground. The other half of the power comes from the clock control bake relay when you call for bake. If you do not get 120 vac out of the relay, then you need to change the Relay board part # DE81-09179A. Thank You. -- Read More...
Teresa November 01, 2011 for Model Number ERD30S06CP I would like to get the element burner and the ignitor part number and how much each is and where can I get replacement parts? Thanks
1 Answer Hi Theresa. The burner ignitor is part # DE81-02696A. The element is part # DE81-06277A. The top ignitor is part # DE81-02696A. Thank You. Read More...
Mary September 23, 2011 for Model Number ERD30S06CH What is the difference between Burner element # AP3393456 and AP3391836? Can I use the less expensive one in my oven? Thank you.
1 Answer Hello Mary. There is a differance in the ratings and the size of the two elements. You will need to use DE81-09769A based on the model number you provided. Hope this helps. Read More...
Mary September 23, 2011 for Model Number ERD30S06CH I need to replace our bake burner on the bottom of the oven. 2 of your parts look very much alike. Which one works with my oven? Thank you!
1 Answer Hello Mary. Based on the model number you provided, DE81-09769A is the correct bake element. Hope this helps. Read More...