Jack May 09, 2020 I have a Dacor PGR range. Will the igniter assembly 76482-001 work in this model? Another site says it replaces Dacor part 66281 and fits models ERD48 ERSD30 SGM365. I know it's not available here but other suppliers still stock it.
1 Answer Jack, The DE81-02696A / 76482-001 Top burner spark igniter is the factory direct replacement part for your product. It is no longer available at AppliancePartsPro.com. Before you order/purchase the part " Note: if original burner rings had holes around the base you will need to order new burner rings using your model number. The new electrodes are not compatible with those style rings. Dacor recommends replacing all the electrodes." Thanks, Read More...
Tyle April 05, 2020 for Model Number ER30GSCHNGH My left front burner ignitor has quit working, I have obtained a replacement ignitor from Dacor but can't seem to figure out how to remove the top. The left front burner seems stuck or attached to the gas piping underneath.
1 Answer Tyle, the burner rings should be able to pull up away from the bottom burner ring. The bottom burner ring would be mounted to the base by two screws that would need to be removed. The same will need to be done for each burner to allow the top to be removed to access the burner manifold base to change out the ignitor. Read More...
Devin Tower December 17, 2019 for Model Number Dacor SGM364s Left front Ignitor is not sparking or sparks sporadically so burner will not ignite. What Part is Ignotoe and how do I replace.
1 Answer Devin, The top burner spark igniter is DE81-02696A and has been discontinued by the manufacturer with no suitable replacement available. Read More...
John January 16, 2018 for Model Number SGM364S All four ignitors stopped working on my SGM364S at the same time. Seems very odd that each individual ignitor would go bad at the exact same time, so I'm wondering if there's something else I should be looking for? What else could fail that would then cause all the ignitors to not work?
1 Answer John, For this issue the most likely cause will be a faulty spark module which will be part number DE81-03926A. Read More...
Genette May 21, 2017 for Model Number Dacor PGM365 My large burner ignites, but it continues to make a clicking sound then a loud almost explosive sound and there seems to be moisture coming from around the dual burner cross ring. Checked for leaks and there is none. Whoever owned house before left a big spill of something all around it.
1 Answer Gennette, You will want to check the switches on the burners to make sure that the switch is not bad. This issue could be the switch or the spark module. Read More...
Peter May 16, 2017 for Model Number Dacor ER30G What is the correct ignitor part number for the right and left front burners? Thanks.
1 Answer Peter, It would appear that the manufacturer does not offer the igniter as a separate part and you would need to get the burner assembly in order to get the igniters. Read More...
Max December 10, 2016 for Model Number SGM304B/LG Front right igniter does not work. What is the correct part number for this? Also, how do you access the igniter module end of the igniter wire? This is a cooktop.
1 Answer Max, The igniter assembly for this module will be part number DE81-02696A. To remove the wiring you would have to remove the main top by removing the burners from the unit and removing the screws on the outer edge of the burner box and lift the top off. Read More...
Alan July 17, 2016 for Model Number Dacor ER30DSR What is the correct ignitor part number for the right front burner? Thanks.
R January 11, 2016 for Model Number DACOR RSD30S Yellow flame with soot on front left burner. Hi. I cleaned the burner ring and stuck a pin through each of the burner holes to ensure nothing was block. However, when I light the burner the flames leap high and are yellow, along with the smell of gas. None of the other burners exhibit this behavior. I switched both the front left and back right burner rings and caps. Same outcome. Is something else i.e. other part can be replaced? Or do I need new burner rings? Thanks
1 Answer R, If the same thing occurred on the left front burner with the other burner ring on it then the issue will most likely be a burner valve issue. The part number for the left front valve will be dependent on the serial number. If the serial number was prior to FD7220084 then you will need part number 86082 and if after that serial number then will need 86277. Read More...
Larry K. October 26, 2015 for Model Number Dacor ERD48 NG Will this part (AP3866890) work with the burner rings on my stove? There are holes in the rings.
1 Answer Hello Larry, I'm sorry but if the part is not listed by the manufacturer under the model number provided, it cannot be guaranteed to fit. Read More...