Dennis March 26, 2017 for Model Number AGR5844VDS1 Need to convert to LP. part AP6012842 gives me the surface unit spuds. What are part number's for the broil and bake?
1 Answer Hello Dennis, The bake and broil burners are converted by adjustment and no parts are necessary for this adjustment. Simply turn the brass hoods directly under the bake and broil burners clockwise until bottomed WITHOUT over tightening, (1 1/2 to 2 turns). Don't forget to convert the regulator by flipping the gas stop on it over. This is done by flipping the brass nut under the plastic cap over. Read More...
Dennis March 24, 2017 for Model Number AGR5844VDS1 Need lp orifice for oven burner and lp orifice for broiler burner......part #'s? Looks like part # AP6012842 will provide the surface burner lp orifices that I need....correct?
1 Answer Dennis, Yes the LP gas kit for your unit will be WP8523418. For the oven you will need to tighten the orifices down 2 to 2 1/2 turns and open the air shutter on the burners. You will also need to flip the cap on the regulator. Read More...
Nikki December 27, 2016 for Model Number WFG320M0BB0 We need to convert a whirlpool gas range back to natural gas. I've found all of the stove top burner orifices but have met a wall on the oven orifice. According to the manual we need Natural Gas Orifice stamped "47", but I am unable to locate a part number anywhere...part# 234826 is widely available and seems to fit a variety of models. Are you able to tell me if this oven orifice would fit my model? Thank you! Nikki
1 Answer Nikki, The orifice WP234826 would not be for the bake burner. The only way to get this would be to get the oven safety valve which is part number WP98014893. Read More...
Megghan October 27, 2016 for Model Number 66575002103 Hi, I am going to be ordering new orifices from you but before I place my order I just wanted to make sure there wasn't a special tool to change them? My husband already adjusted the oven and broiler and now we just have to do the stove top. Do we just use a regular wrench or do we need something special?
1 Answer Megghan, It would just require a 1/4" or 5/16" socket or nut driver to replace the orifices on the stove top. Read More...
John Z September 17, 2016 for Model Number SF362BEGN1 Hi, I acquired this older stove and I realize due to it's age, the parts would be difficult to find OEM. This is not rocket science I know, so, please explain why I can not use any LP orifice that will fit into the threads of my stove to convert to LP. If it is possible to find a set of orifices that will thread into my stove, why won't they work? If they will "work" please let me know which ones will thread into my unit and work best. There MUST be compatible orifices to fit this Whirlpool stove. Thank you for your time and for your suggestion of the closest matching conversion kit. John
1 Answer John, Unfortunately we cannot advise on orifices that will work for your unit to go to LP due to the btu rating for each of the burners. Read More...
Dennis R. July 14, 2016 for Model Number SF367LEKV How do I adjust the oven orifice from natural gas to LP?
1 Answer Hello Dennis, Turn the gold toned orifice hood under the burner assemblies clockwise 1 1/2 to 2 turns with a 1/2 inch open ended wrench. You need to bottom the orifice hoods without over tightening since over tightening will cause damage. Of course the surface will have to be converted using the orifices from the conversion kit WP8523418 installed in the appropriate places. Read More...
Heath February 29, 2016 for Model Number SF315PEKQ0 Hello I would like to convert my cooktop/oven to propane, can you please tell me what parts I will need to accomplish that and part numbers. Thanks Heath F
1 Answer Hello Heath. Sorry, the part needed 98005979 has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part. Read More...
Bill October 10, 2015 for Model Number SF367LEMW1 I need to convert this stove back to natural gas. What parts do I need?
1 Answer Hello Bill, You will need to order one of each of the following: WP8273064 left front, WP8273065 right front, WP8273066 left rear, and WP8273067 right rear. The bake and broil burner hoods will need to be adjusted, (loosen counterclockwise 1 1/2 to 2 turns). Read More...
John September 02, 2015 I change the top burners to lp and the boiler and oven on the card said to adjust air shutter don't have orfice to change I have flames shooting out the sides and yellow
1 Answer Hello John. You need to flip the regulator to LP and you need to adjust the orifice in the oven until the flame is blue in the unit. Read More...
John A April 10, 2015 for Model Number GS465LELS1 The appliance (stove, oven) was converted to LP and the gas company finally ran gas to the home. I need to convert it back to Natural Gas. What kit do I need?
1 Answer John, to convert back to NG you'll need three of the NG orifices part number WP8273065 (for the left front, left rear, and right front burners) and one of WP8273067 (for the right rear burner). Flip the regulator back to NG and adjust the oven orifices. Hope this helps, thanks! Read More...