1 Answer Hello Lynn. Lean the machine backwards and see if the pump WP3363394 has a hole in it or a bad seal. If so, you will see water dripping out from it. Also check all the hoses under the washer for leaks. Hope this helps. Read More...
George July 15, 2011 for Model Number WTW5700SW0 When using the "COLD" setting, hot water comes out. Hoses are connected correctly. Shut-off the hot water and washer stops waiting for the "rinse cycle. When I turn on the hot water, the rinse cycle begins but has only hot water.
Roy S. July 06, 2011 for Model Number lxr9445jqo Where can I get new parts, when and how much. I removed the bolt and the two parts it connects to, they both seem to need replacement. thank you . please respond asap
1 Answer Roy, You can order the needed parts from the AppliancePartsPros.com home page and use the Find Parts tab. All the information you need will be there. You can also contact our APP Call Center at 1-877-477-7278, We'd be happy to research the parts for you, we offer expedite shipping if you needed the part yesterday. Thanks and Good Luck. Read More...
Fung June 23, 2011 for Model Number GLWS1339ESO Frigidaire Gallery washing machine Is making a very loud metallic noise probably by broken bearing.
1 Answer Hello Fung. You will need to check and see if the tub bearing 3204405 is bad. If so, yuo will need to replace the bearing and the tub seal 5303279394. If the bearing is good, you may have a bad transmission 134737100. Hope this helps. Read More...
Gary J. June 13, 2011 for Model Number LSQ9549LW1 The washer takes a VERY long time to fill with water (couple of hours). It then completes the rest of the cycle. Water pressure going in is good, and hoses not obstructed. Is it clogged, or need a new pump? THANKS
1 Answer Hello Gary. You will need to check and see if the water valve 285805 is bad, and not letting the water in fast enough. If so, you will need to replace the water valve. Hope this helps. Read More...
Gus June 08, 2011 for Model Number WTW57ESVW0 Whirlpool Washer will not start in any cycle, but will spin in spin mode. Is it the timer or the water level sensor?
1 Answer Hello Gus. If the unit does not bring in water and will only spin, you will need to replace the sensor switch WPW10292584. Hope this helps. Read More...
Shawn June 08, 2011 for Model Number 11026852503 Washer won't come out of super cycle, will fill and start agitating but just keeps on agitating.
1 Answer Hello Shawn! Is the timer advancing to the next cycles? If not, it will need to be replaced. Your timer part number is WP8557393. Thanks! Read More...
Reglisa123 June 03, 2011 for Model Number GSW9800PW1 My washer fills up but will not do anything, only hums in spin cycle. What can be wrong with it?
1 Answer Hello Reglisa123. You will need to check and see if something is stuck inside the pump assembly WP3363394. Also make sure nothing is stuck between the inner and the outer tubs of the machine. If all is clear, you may have a bad timer WP8562615. Hope this helps. Read More...
Denny May 30, 2011 for Model Number lsb6200kq0 My washing machine turns on, spins and then just stops completely. Is the control board faulty? If you have some idea, please respond. Thank you.
1 Answer Hello. If it takes a while to restart, you could have a motor WP661600 getting hot tripping the overload switch. Once it cools, it should reset and start back up. Thanks! Read More...
1 Answer Hello April! You will need to check the lid switch WP8318084. You can test this using a multimeter MA-DM1. Here is a link from our free repair forum you can refer to for help with using a multi meter. Hope this helps, thaks! http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...