Polly E. April 28, 2011 for Model Number LSQ9600LW0-whirlpool 2003 washer I have had to replace the coupler on my washer for the eighth time. Why? Am I wrong to think that a washing machine should last more than 7.5 years?
1 Answer Hello Polly. You may have a brake problem. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/washer-repair/3265-replacing-direct-drive-washer-brake-shoes.html Read More...
George T. April 27, 2011 for Model Number whirlpool washer wtw5200sqo Machine fills with water, however thats all its doing, not washing. Any help? Machine is less than 4 years old. No burning smell just won't wash.
1 Answer Hello George. It sounds like the lid switch is bad. You will need to test it and see if it is good. It should read closed, with the lid shut. If it is open, you will need to replace it. You can test this with a multi-meter MA-DM1. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
1 Answer Hello Rick. If the only way you can get the water to stop is by turning it off at the shut off, then the valve 285805 is bad. If you can stop it at the switch, then the pressure switch W10337780 or the pressure hose is bad. Hope this helps. Read More...
1 Answer Hello Bobby! Unfortunately, we are unable to locate the cu ft of Whirlpool model LSN1000KQ0. You may try the manufacture for assistance regarding the cu ft information. If you are in need of any parts, please let us know we will be more than happy to help! Thanks. Read More...
1 Answer Hello AJ! It seems we do not have the CU FT listed for your Whirlpool model LSQ9659PW4. Sorry! Read More...
Albert April 16, 2011 for Model Number lxr7144ezo Looking for cu capacity for this machine to compare to newer models. Thanks
1 Answer Hello Albert! We do not seem to have the CU FT listed for model LXR7144EZ0. You can try the manufacture for further assistance. Sorry. Read More...
Ebony April 12, 2011 for Model Number LST8244AQ0 What is the wash load capacity (cu) for the Whirlpool LST8244AQ0?
2 Answers Hello Ebony! We do not seem to have the capacity listed for model LST8244AQ0. You can try contacting the manufacture for further information. Sorry. Read More...
Ebony April 12, 2011 for Model Number LST8244AQ0 What is the wash load capacity (cu) for the Whirlpool LST8244AQ0?
2 Answers Hello Ebony! We do not seem to have the capacity listed for model LST8244AQ0. You can try contacting the manufacture for further information. Sorry. Read More...
Sam W. April 11, 2011 for Model Number whirlpool WTW5200VQ2 The washer shakes like it is off balance at the end of both spin cycles. It is not over loaded and does not shake during the agitation cycles.
1 Answer Hello Sam. You will need to check and see if the suspension spring 285901 has come off, or is broke. Hope this helps. Read More...
Jay April 10, 2011 for Model Number lsq9645kq1 Stopped during wash cycle with burning electrical smell. Stopped waited 1 hour then spun water out no problem. How do I get apart to check electrical parts? Thanks
1 Answer Hello Jay. You will need to remove the two screws in the back corners of the control panel. Once removed, you can pull forward and lift the control panel to access the electrical parts. Hope this helps. Read More...