1 Answer Hello Casey. You will need to order WP8182119 for the door boot needed for your model number. Read More...
Jason June 26, 2017 for Model Number MHWE500VW11 I have a Maytag 500 Series washer (mhwe500vw11), will this bellow fit my washer? Also will this align with the inner washer basket? I bought another bellows and it didn't align with the inner washer basket and clothing items would get caught between the bellow and the basket.
1 Answer Hello Jason. You will need to order WP8182119 for the bellow needed for your model. Read More...
German C. January 16, 2017 for Model Number GHW9150PWO Would like to know how much a technician will charge to install the Washer Door Boot. Thanks
1 Answer Hello German, You will have to call around in your area to get an idea of your local rates. Read More...
Carlos November 12, 2016 for Model Number MWFW9150WW00 What bellow will fit this model number? MWFW9150WW00
Cj October 06, 2016 for Model Number GHW9100LW2 The door seal is moldy and needs to be replaced. What part # do I need to order?
Jack October 04, 2016 for Model Number 110 46742 702 What door gasket is used for this Kenmore Elite front loading washer? What is the part number for the bellow seal? Thanks
1 Answer Jack, The correct waher door boot for model number 110.46742702 is WP8182119 / 8182119 . The part is in stock and available at this time. Thanks Read More...
Kenmore Elite Quiet Pak 2 August 08, 2016 for Model Number 110.45862400 For the last year my machine has been holding some water in the bellow area. No visible water in the drum/tub). I've tried running the spin cycle to remove the remaining water but that doesn't help. Recently, I have noticed a little dampness on the rug below the front of machine and when I removed the lower front panel there is some rust on the top of the panel. We cleaned out all the drain traps and etc... Water was there again after running a load yesterday. Any suggestions? The current bellow seems to fit tighter(gap between bellow and drum) at the top than at the bottom. Should it fit evenly?
1 Answer Kenmore Elite, You will want to take off the lower panel while the unit is running and see if you can see where there is water leaking from. This sounds like it would be a bellow issue. Read More...
Mark J July 19, 2016 for Model Number MHWE200XW Front Loading Washer The washer bellow tub seal on my washing machine is full of mold that won't come off so I would like to replace it. I saw your video and although this washing machine looks similar to mine, none of the Maytag washing machines associated with this part were the same as mine. Can I replace my moldy bellows tub seal with part #8182119? If not, which one should I use and is there an associated repair video? Thanks, Mark
1 Answer Mark, The bellow that would work for your unit is WPW10381562 and there is a video listed under the part on appliancepartspros.com. Read More...
Stu April 11, 2016 for Model Number 592-49087 01 Hello, I have a Kenmore Elite front load washer and want to confirm the part number for a washer bellow replacement. I couldn't find my model number in your list. Can you kindly confirm which one I should order? Thank you
1 Answer Hello Stu. The model number will have to be verified on the units I.D. tag since the one listed came up invalid. This will be necessary to look up and specific parts such as the one you requested. Thank you for your patience and understanding in this matter. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...