Dave October 06, 2019 for Model Number 110.44962602 Does this part fit my washer? This part comes up when searching for parts for my model # 110.44962602... But when I click on the compatability box and search for my model it says, not a fit.... Please advise and thanks Dave
1 Answer Hello Dave, you'll want to double check the model number provided as it does not come up as valid. Thanks! Read More...
Lyn September 07, 2019 for Model Number WFW9200SQ02 Is the part number for this model, AP6011758 , Thanks, Lyn
Rick-23464 July 15, 2019 for Model Number GHW9150PW0 I need to replace door bellows, and the instruction video shows removing the top cover from the washer to take off the front panel. The dryer is stacked on top of the washer so the top can't be removed. Can the front panel be removed with the top still in place or must the dryer be taken down first? Thanks, Rick
1 Answer Hello Rick, unfortunately, the washer front panel will need to be removed for this part to be replaced and if stacked the dryer will need to be uninstalled. Read More...
Laurel October 12, 2017 for Model Number 110 450 87 400 Where can I obtain spring plyers for front door seal?
1 Answer Hello Laurel. You will need to order 383EER4001A for the spring removal tool needed. Thanks. Read More...
Jonathan October 02, 2017 for Model Number 11045872400 Hi, is this an OEM part, or aftermarket? Will the fit be guaranteed? I installed an aftermarket replacement from Amazon. Installation was fine, but the washer door would not close shut. It seems the rubber around the door seal is too thick. I am returning the item Will I run into this problem with your part? Thanks!
1 Answer Hello Jonathan. WP8182119 is an OEM part and should fit the model number you provided. Here is a link to our return policy. Thank you. http://www.appliancepartspros.com/customerservice/returns.aspx Read More...
Michael September 20, 2017 for Model Number MHWE950WW01 I loved the video you posted, it was very helpful. I have had a little difficulty completing the install of my new bellows, it feels like it's binding against the door. I've taken it apart and reassembled several times ensuring the spring clamp is tight and as close as possible to front wall of the washer. Is this normal for a new bellows? Should I expect less of this as it's been on there longer or is there another issue?
1 Answer Hello Michael. Yes, it has to be tight or it will allow water to leak out the door. It will form to the glass over time. It should be fine if it is not causing any issues. Read More...
Anand September 06, 2017 for Model Number MHWE300VF00 Hello, I have a Maytag 3000 series washer, Model: MHWE300VF00. The bellow seal is broken with a small crack. I am looking at part no: AP6011758 to replace it with. a.) is this the right part? b.) Is this an OEM part or is this an After-market, third party part? Thanks,
1 Answer Anand, The part number for the bellow on your unit will be WP8182119 and would be an OEM part. Read More...
Jeremy August 17, 2017 Will boot bellow w10290499 fit model number nfw7300ww01? I also found that the old p/n which was w10300559 has changed to wpw10381562. That being said I have the w10290499 and can not get it in to save my life...what am I doing wrong if it should fit?
1 Answer Jeremy, Part number W10290499 is showing that it was a direct replacement but then has subsequently subbed over to WPW10381562. The one you have should work, it is just difficult to get in place. Read More...
1 Answer Hello Hope, You will need to order door bellows WP8182119 for the model provided. Read More...
Dar July 20, 2017 for Model Number Kenmore 110.47512601 Will the WP8182119 fit my kenmore model 110.47512601? Thanks