Customer Questions and Answers for Blower Belt by Whirlpool

D.m. Sheara, The pulley wheel will screw on the same direction as the blower wheel turns and will not come off. For the belt if you put the belt on the motor pulley first and then start it around the blower pulley, you will be able to turn the pulleys and allow the belt to slide into place. Turn it the direction the pulley needs to go on.

Hello John. The blower belt rotates in the direction of the fan blades so the blower can remove the air. The manufacturer does not specify CW or CCW. You should be able to look at the blades on the blower and determine the direction.

Karl, the following link from our repair forum will provide a belt diagram. Hope it helps! http://forum.appliancepartspros.com/dryer-repair/25860-dryer-belt-diagrams.html

Hello Bill. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/dryer-repair/25860-dryer-belt-diagrams.html

Hello Forrest. You will need to replace the belt 4392067 on the unit to reapir the problem. It is best to replace the kit when replacing a broke belt. Hope this helps.

Hello Bud. You will need to disconnect the power to the unit. Then release the clips under the top panel of the dryer and raise the top panel. Next remove the front panel from the dryer. Once removed, you can access and replace the belt WP8544742 on the blower assembly. Hope this helps.