Whirlpool Dryer Belt

Silence the squeaks and keep laundry moving - upgrade your dryer with the Whirlpool 4392067 OEM Repair Kit.

Note: Belt may differ from your dryer's model—Double-check compatibility before purchase. 

Why choose this kit?

• All-in-one fix: OEM belt 661570V, 4 heavy-duty rollers WPW10314173, idler pulley 279640, tri-rings & washer - everything factory-fresh in one box.
• Wide compatibility: Fits 27" Whirlpool-family dryers—Cabrio, Duet, Bravos XL, Thin Twin, Kenmore 110-series, Maytag, Roper, Estate & more.
• Pro-grade durability: Roller bearings & reinforced belt deliver whisper-quiet tumbling and longer service life.

Fixes these common dryer problems

DIY install in about 45 minutes

1. Unplug dryer and remove front panel.
2. Lift drum to release belt; remove old rollers & idler.
3. Install new rollers, pulley & belt following the routing diagram.
4. Re-assemble, run test cycle - enjoy quiet, smooth tumbling.

&n

Get your dryer spinning smoothly again - install the Whirlpool 341241 OEM Drum Belt in minutes.

Why this belt?

• Exact factory spec: 92 ¼-inch length × ¼-inch width, 4 ribs / 3 grooves - built to Whirlpool standards, not a generic copy.
• Broad compatibility: Fits most Whirlpool-made dryers - Kenmore 110-series, Roper, Estate, Maytag, KitchenAid, Admiral, Crosley, Amana & more.
• Quiet, durable rubber: Reinforced EPDM resists cracking and stretch for years of reliable tumbling.

Fixes these common dryer problems

DIY install — about 15 minutes

1. Unplug dryer; remove lint screen housing & front panel.
2. Release belt tension at idler pulley; lift drum slightly to slide old belt off.
3. Loop new belt around drum, idler pulley and motor pulley (ribbed side down).
4. Re-assemble, run test cycle - enjoy quiet, consistent tumbling.

The Dryer Repair Kit is an OEM replacement part for Whirlpool 29-inch large capacity dryer models. It is a kit designed to provide various essential components and hardware needed for common dryer repairs or maintenance tasks.

The kit includes:

• One Dryer belt (341241)
• Drum support roller kit (349241T)
• One idler pulley (WP691366)
• Instructions.

Please note: Some parts in this kit may not fit your specific model. Use your model number to check for your specific parts.

Causes of needing a dryer repair kit can include worn-out or damaged components due to normal wear and tear, accidental impact or mishandling, or maintenance requirements after a certain period of use.

Symptoms that may indicate the need for a dryer repair kit include:

• Excessive noise or vibrations during operation
• Difficulty in opening or closing the dryer door
• Clothes becoming tangled or wrapped around the drum
• Leaks or air drafts affecting drying performance

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

The Drive Belt is an OEM replacement part for Whirlpool dryers. This essential component is responsible for transferring power from the dryer's motor to the drum, allowing it to spin and tumble the clothes during the drying cycle.

Symptoms of needing to replace the drive belt include:

• The dryer drum not spinning or rotating
• Loud squeaking or grinding noises during the drying cycle
• Excessive vibration or shaking from the dryer
• Clothes taking longer to dry or remaining damp

Causes of a faulty drive belt can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or mishandling.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

The Belt is an OEM replacement part for Whirlpool dryers. This belt wraps around the drum, motor pulley, and idler pulley, allowing the drum to rotate smoothly during the drying cycle.

Over time, the belt can wear out or break due to regular use, friction, or exposure to heat. Physical damage, overloading the dryer, or improper installation can also contribute to belt failure.

Symptoms of a bad belt include:

• The dryer drum not spinning
• A squealing or thumping noise during operation
• The dryer starting but stopping shortly after
• The motor running, but the drum remaining stationary

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drum Drive Belt is an OEM part for Whirlpool dryers. This part transfers power from the dryer's motor to the drum, enabling it to tumble. Made from durable, flexible materials, the belt wraps around the dryer drum, tension pulley, and drive motor pulley, keeping everything moving smoothly and efficiently. 

A bad Drum Drive Belt can result from fraying or wear due to regular use, leading to loss of integrity and eventual breakage, glazing causing slippage and reduced dryer efficiency, and stretching reducing tension and hindering proper drum tumbling.

Symptoms of a bad Drum Drive Belt include:

• The dryer motor running but the drum not tumbling.
• Unusual noises, such as squeaking or thumping, indicating the belt may be worn or misaligned.
• The dryer not starting at all if the belt has broken completely.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Blower Belt is an OEM part for Whirlpool dryers. This belt drives the blower fan, which is essential for circulating air through the dryer drum and out the exhaust vent, ensuring efficient drying of clothes. The blower belt is designed to fit seamlessly within the dryer, maintaining optimal airflow and drying performance.

You should replace the blower belt if it becomes worn or damaged. Common causes of a bad blower belt include wear and tear from regular use, stretching or fraying over time, or snapping due to excessive strain.

Symptoms of a bad blower belt include:

• Dryer not producing enough heat
• Clothes taking longer to dry
• Unusual noises during the drying cycle
• The dryer stopping mid-cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drive Belt is an OEM part for Whirlpool dryers, engineered to connect the dryer drum to the motor, allowing it to turn. This component is essential for the proper operation of your dryer, ensuring clothes are dried evenly and efficiently. Made from durable materials, the drive belt is designed to withstand the constant motion and heat of the dryer, but over time, it can wear out or break, necessitating a replacement to keep your dryer running smoothly.

The primary cause of drive belt issues is wear and tear from regular use. Over time, the belt can stretch, lose its tension, or break, resulting in a drum that no longer turns. Regularly inspecting and maintaining the drive belt can help extend its life and the overall functionality of your dryer.

Symptoms of a failing Drive Belt include:

• The dryer drum not turning, even though the motor is running
• A squealing or rubbing noise coming from the dryer when it is in use
• The dryer stopping unexpectedly during a cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This Drive Belt is an OEM part for Whirlpool dryers. It connects the dryer drum to the motor, enabling the drum to rotate during the drying cycle.

Causes of a faulty drive belt can include normal wear and tear, stretching or slipping due to age or excessive load, or damage from foreign objects or overloading. A worn-out or damaged drive belt can lead to issues such as a drum that doesn't spin or rotate properly, abnormal noises during operation, or a dryer that doesn't dry clothes effectively.

Symptoms of a bad drive belt may include:

• Drum not spinning or rotating during the drying cycle
• Squealing, screeching, or thumping noises coming from the dryer
• Clothes taking longer to dry than usual
• Burnt rubber smell during or after operation

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Belt is an OEM replacement part for Whirlpool clothes dryers. It is the drive belt responsible for transmitting rotational motion from the drum motor to the tumbling drum inside the dryer cabinet.

Causes of a bad belt include drying, cracking, and breakage due to age, heat exposure, or excessive stretching over repeated use. Lost elasticity means the belt can no longer handle high-speed drum rotation.

Symptoms of a bad dryer belt include:

• Drum not spinning or rotating very slowly during drying cycles
• Loud squealing, scraping, or slipping noises from the dryer interior
• Potential belt fragments inside the drum after breakage
• Inability to fully dry clothes within a reasonable time

This OEM Whirlpool part is also compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Drive Belt is an OEM part for Whirlpool clothes dryers. Located inside the dryer cabinet, this poly-V belt links the motor to the tumbling drum.

Causes of a bad drive belt can include cracks or splits that develop from extended use over years of manual clothes drying. Improper tension may also contribute to early wear.

Symptoms of a bad drive belt include:

• The dryer drum fails to turn or rotates slowly
• A squealing belt slipping on the pulleys
• Cracks, splits or visible wear on the belt surface
• Motionless dryer and inability to initiate cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dryer Belt (length 79-1/8 inches) is an OEM part for Whirlpool dryers. This belt wraps around the drum, the motor pulley, and the idler pulley to enable the drum to rotate during the drying cycle. It ensures that clothes are tumbled and dried evenly. Also available in repair kit AP3109603

Over time, the dryer belt can become worn or snap due to the constant tension and friction it endures. When the belt fails, the drum will no longer spin, and the dryer will be unable to dry clothes effectively.

Symptoms of a bad dryer belt include:

• The dryer drum not turning
• A burning smell from the dryer
• Unusual noises during operation
• The dryer running but not tumbling clothes

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Belt is an OEM replacement part for Whirlpool clothes dryers. This belt transfers power from the motor to the drum, causing it to spin and gently tumble dry clothes.

Causes of belt failure typically relate to normal wear and tear over thousands of dryer cycles. As belts constantly rotate under tension, cracks and looseness can develop which affects their ability to grip smoothly. Physical damage from improper installation is another potential cause.

Symptoms of a worn or broken belt include:

• An unbalanced or off-center drum that wobbles during operation
• Loud squealing, screeching or grinding noises
• The motor runs but the drum does not spin
• Damp or partially dried clothes after a full cycle

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This drive belt transfers the motor's rotation to the appliance's drive system so moving parts turn as intended. Replacing a stretched, cracked, or broken belt restores smooth operation and helps prevent slipping or squealing during cycles.

• Transfers motor power to the driven component (drum, pump, or transmission—varies by model)
• Maintains proper friction and tension across pulleys for consistent rotation
• Wear or stretch can cause slipping, noise, or loss of motion
• Common symptoms: no spin/tumble, intermittent movement, squealing/chirping, burning-rubber smell, visible cracks/fraying

• Disconnect power; also shut off gas supply
• Access the belt path per your model's service information and note routing before removal
• Route the new belt over the motor and idler/driven pulleys; rotate by hand to seat and align
• Inspect pulleys/tensioner and bearings; replace any worn parts to prevent premature belt wear

The Belt is an OEM component for Whirlpool dryers. It is a crucial component that transfers the rotational motion from the dryer's motor to the drum, enabling the tumbling action that facilitates efficient drying.

Causes of a bad belt can include excessive wear and tear due to prolonged use, exposure to high temperatures, or improper installation. A damaged or worn-out belt can lead to various issues with the dryer's performance.

Symptoms of a bad belt include:

• The drum is not spinning or rotating properly
• Squeaking or grinding noises during the operation
• Visible cracks, fraying, or signs of damage on the belt
• Clothes taking longer to dry or not drying completely

This OEM part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This poly-V blower belt links the motor to the blower wheel to move air through the appliance. Replacing a worn or broken belt restores proper airflow and helps maintain reliable drying/venting performance. What it does:

• Transfers motor rotation to the blower/impeller to circulate air
• Helps maintain proper airflow through the cabinet and exhaust
• Common failure signs include weak or no airflow at the vent, longer run times, or safety shutdown from poor airflow
• Physical clues: belt broken, frayed, glazed, stretched, or squealing from the blower area

• 1 poly-V blower belt

• Disconnect power and, if applicable, shut off gas supply before servicing
• Access varies by model; remove panels or blower cover to reach the belt
• Note routing; seat belt ribs in pulley grooves and ensure correct tracking
• Rotate the blower by hand to confirm alignment before reassembly and test run