Ray November 15, 2021 for Model Number KGCC566HBL2 My left front burner is the largest, it seems that the cap and burner head have worn to the point that the flames are restricted, do you have the black cap and burner for this unit?
1 Answer Hello Ray,the left front burner base is part WP4455849 but is no longer available from the manufacturer, and the cap is WP3191737. Read More...
Adonna Brand February 10, 2019 for Model Number KitchenAid Stove top KGcc505HWHO I ordered a large burner head from you being the left front burner but taking all the burners apart we found the one I received was a medium size so it will not fit. The size I need is 3 1/2 inches across and I also need 8 screws to replace all new screws. Can you help?
1 Answer Adonna, The correct part number for the left front burner for the model number you supplied is 3191738 Mouse Gray, Cap, (LF) and the WP3368921 Screw, 7-18 X 3/4 are the burner base screws, you'll need eight(8) screws. All the parts are in stock and available at this time. Thanks, Read More...
Andrey January 14, 2019 Does the Part Number: AP6009490 comes with the igniter? if not what is the part number for the igniter? The spark from my igniter is weak and doesn't light up 90 percent of the time, do I need to replace full head or just an igniter?
1 Answer Andrey, the burner head does not come with the igniter, it is purchased separately, Make sure the area where the spark is arcing to is good and clean. Poor sparking is usually due to food or some type of debris that is not making a good ground. Read More...
Abe May 03, 2017 for Model Number PGR5705BDT The 2 right side burners don't spark as strong as the left side & therefore don't ignite.
1 Answer Abe, You will want to make sure that the burner heads are clean and if they check ok then the issue will be a faulty spark module. Read More...
1 Answer Paul, To remove the burner head you lift off the grate and the burner cap. There will be 2 screws that hold the burner head in place that you would need to remove. Read More...
George L. August 25, 2014 for Model Number whirlpool gs400lemq This range has a tiny burner in the left rear. I would like to replace it with a regular burner. Can I do that?
1 Answer Hello George, While it is not impossible, I would need a valid model number to look up what you actually have so I can see what would be compatible with the unit before we can even say it is possible. I'm sorry for this additional inconvenience. We do sincerely appreciate your patience and understanding in this matter. Read More...
Jim G November 28, 2012 for Model Number Kitchen Aid Superba KGSC308LSSO The left front burner for a kitchen Aid Superba range KGSC308LSO receives gas but the flame is very low as compared to the other burners. I am guessing it needs a cleaning, are there instructions for cleaning the burner or could it be a different cause of the problem of low gas flame.
1 Answer Jim, Once you remove power to the range, you'll want to remove the burner cap WP3191898 and check the burner base and orifice WP4455849,WP9753929 for debris and traces of a "spill over" you may want to carefully remove the orifice and check the opening and the back side, as well. With power off to the range, you can open the burner valve for a second or so, to "blow out" any debris, that may have accumulated in the tubing, burner or valve. After the cleaning process, if the problem persists you'll need to replace the gas burner valve 9755405, there would have to be an internal clog, or valve body failure. Read More...
Dennis July 07, 2012 for Model Number sf362lxsb How do you replace the sealed burners for the stove top part # ap3174626
1 Answer Dennis, Once you unplug the power cord and turn off the gas supply. After you remove the burner grates and caps. You'll need to unscrew the two phillips head screws in the burner base (12 and 6 0'clock positions in the parts diagram) and lift the burner base 1 or 2 inches off the cooktop, Disconnect the igniter wire and label it(you may want to label the caps and burners as well). Once all the burner bases are removed, you can then raise the lid from the front and remove it. Read More...
Alma G. July 02, 2012 for Model Number Sf362lxsb0 Power burner(bottom left) sparks but will not ignite. When I turn on top left, the bottom left also sparks but nothing happens to the top left burner. Can I try using a lighter to start it or do I need a part or tech to fix? Alma Gordon (c) 214-683-4412
1 Answer Hello Alma. Make sure the burners on the unit are clean and dry and the spark switches are closing when you turn them on. If all of this is good, you will need to replace the spark module WPW10331686 on the unit. Read More...