Jim August 12, 2011 for Model Number MVWC300VW1 Per the parts diagram for the cabinet and top, there are only 2 clips that hold the top down; they are shown as being on the rear of the top/cabinet. What fastens the top to the FRONT of the cabinet?
1 Answer Hello Jim! The top of the washer is secured by clips on the front of the cabinet that are built onto the cabinet. If you are trying to access the machine you can use our handy YouTube video, hope this helps. http://www.youtube.com/watch?v=V5aW9WkTFhE Read More...
David April 20, 2011 for Model Number MTW5280TW0 How do you replace this clip and lock in the back panel? This has me baffled! I've tried everything, but obviously not the correct thing. Thanks.
1 Answer Hello David. First make sure the cabinet is seated properly on the frame of the machine at the bottom. Also make sure the back panel is positioned correctly onto the cabinet. If you look at the picture of the part on our site, the right side of the clip goes into the slot on the back panel. Then you will push down on the clip and snap it into the slots on the cabinet to lock it into place. Hope this helps. Read More...
Shorty 1940 April 20, 2011 for Model Number Estate Washing Machine Model # CU3423849 How do I put this clip in [part # AP2905177]?
1 Answer Hello Shorty 1940. First make sure the cabinet is seated properly on the frame of the machine and tabs at the bottom. Also make sure the back panel is positioned correctly onto the cabinet. If you look at the picture of the part on our site, the right side of the clip goes into the slot on the back panel. Then you will push down on the clip and snap it into the slots on the cabinet to lock it into place. Hope this helps. Read More...