Len M February 05, 2013 for Model Number KHWS01PWHO Repair service has replaced CCU, MCB, latch assy., and pump. Washer still stops with code F11. Repair service says their at a loss, don't know what to do. All the orginal parts have been reinstalled. If I tap on the CCU the washer will start. The CCU replacement was from a opened box. Would suspect a defective CCU was installed. What would be the correct CCU for this unit. Thank You
1 Answer Hello Len, The display control in the control panel is part number WP8182150 and the machine control board in unit is WPW10137702. Read More...
Douglas P December 26, 2012 for Model Number mfw9700sq1 Can not get washer to power on. checked for a clicking noise when pressing the control/on button and heard nothing. According to the owners manual, we need to replace to CCU (central control unit) board. what part number is that on your web site so that I can get it ordered.
Brown November 24, 2011 for Model Number mfw9800tq0 Washer runs hot when setting on cold/cold. Is this fix?
1 Answer Hi Brown. The first place to check would be the water valve. Is the cold water side plugged and the plunger not working correctly? Is the coil open on the cold side and not opening? The water valve is part # WP8182862. Has someone closed the cold house supply off behind the washer? Remove one hose at a time to flush out under a bucket. There is a temperature sensor in between the heater connections. It should ohm out to approx. 5,000 ohms at room temperature. Thank You. Read More...