Aaron February 27, 2023 for Model Number YWFE710H0BS0 My whirlpool oven is running way too hot. It’s set for 350 but goes up as high as 550 and kicks out. A message on the screen says: 1 fairlure - Broil K3 - bad replace control. What does this mean? Thanks
1 Answer Aaron, This is an indication that the control board has failed and would need to be replaced. Read More...
Joshua G September 11, 2022 for Model Number WFE745H0FS0 My oven temp runs way hot and we ran an auto test which came back with “Broil K3 Bad” and “K8P52 convection fan”. I am guessing that the broil relay is stuck on and would need to be replaced but wasn’t sure what parts I need to get to get this thing going again. Thanks for your time! Josh Gallant
Eddie December 18, 2021 for Model Number GFE461LVS0 My broil element does not heat up. Had element checked and it is good. When I press the broil button it will light up showing 500 but it will not heat up or show a glow. Board shows a # W10157242F.
1 Answer Eddie, if the temperature sensor measures around 1080 Ohms of resistance at room temperature and there are no broken wires, the failure would be in the oven control WPW10308315. Read More...
Santy May 16, 2021 for Model Number Whirlpool W10157242F All heating capabilities NOT working. Control Board is W10157242F M0156 E0154 101130233 Mexico MRCET 732140-03 100423 50 218 0050 Which is the replacement part number please? Thanks for your support
1 Answer Santy, The part number for the control board based on the numbers you provided will be WPW10308315. Read More...
Debbie October 16, 2018 for Model Number GFE471LVS Oven burning top of food during bake mode and displaying "failure detected". Ran "Auto test" and showed F6E-1 and Broil K3 failure. What part and part number needs to be replaced?
1 Answer Debbie, The service sheet says replace control. Sounds like the broil relay is stuck closed keeping the broil element on. Test at P1-1 and P3-1 for 240 continuous vac in a bake cycle. If constant voltage the control would need to be replaced. Read More...
Ron August 03, 2016 for Model Number GFE461LVB My control board has a part number of W10157242F What is the proper board replacement Number?
Dennis April 21, 2014 for Model Number Whirlpool GFE461LVT The control panel seems to work but the oven doesn't stop heating, Eventually it will error f6E1 Runaway temp and F3E2 Temp Sensor. I replace the temp sensor and it still doesn't work. Ran the 'Auto Test' and had 1 failure 'Broil K3 Bad - Replace control' Is this the part I need to replace. Can the current board be repaired?
1 Answer Hello Dennis. Yes, you need to order and replace part number WPW10308315 on the unit. Read More...
Mark January 06, 2014 for Model Number GFE461LVS0 My broiler element seems to have current/hot to touch even when range is not on. I have to shut off breaker to deactivate relay it seems. In normal baking use, the broiler element is causing serious overheating of the oven. I suspect control unit. Your thoughts? Thanks.
1 Answer Hello Mark. Yes, based on the information you provided, you will need to order and replace the control board on the unit. Read More...
Ed May 15, 2013 for Model Number GFE461LVS0 Hi, I am looking for a replacement control board for this stove. The # on the board is W10157242D. The one on your website does not have the "D" on the end of the part number. Is this the same part or does the "D" make it a different part all together? Thanks.
1 Answer Hello Ed! According to your model the electronic control WPW10308315 is the correct replacement. It is the same part listed on your board as W10157242D. Thanks! Read More...
1 Answer Hello Gerald. Here is a link to our return policy. Hope this helps. http://www.appliancepartspros.com/customerservice/returns.aspx Read More...