Whirlpool Washer Owner September 17, 2013 for Model Number LA5400XSW) The upper agitator falls off during spinning cycle and makes a huge racket.
Dave July 02, 2013 for Model Number lsr6332kqi Upper agitator doesn't work, but should I replace the complete agitator for good measure?
Doug June 19, 2013 for Model Number whirlpool LSR8233JQ1 My getting holes in clothes. I think that they are getting caught between the top agitator and botom agitator. The top agitator seems to have lot side movement. I replace the bearing & dog kit. Hopping this would help. Top bolt is tight. Do you think that the wear between the top aditator and lower aditator.
1 Answer Doug, Most likely the bearing and dog kit should work but it may be necessary to replace the complete agitator assembly. Read More...
1 Answer Hello Jan. There is a video on this page. http://www.appliancepartspros.com/whirlpool-medium-cam-agitator-285811-ap3138838.html Read More...
Laurie N. June 09, 2013 for Model Number 110.2806 How to remove the agitator? The nut won't move after you take out the middle cap that exposes the nut.
1 Answer Hello Laurie. Yes, the nut unscrews out of the unit. It may be stuck, but it should unscrew out of the unit. Read More...
Eric June 08, 2013 for Model Number wtw5300sqo I believe we over filled the machine one time and we had a clicking noise as it washed back and forth. Since then even putting less clothes in it we still get clicking noise. Did I strip something??? What do I need to replace??
1 Answer Eric, More than likely the agitator cam has been damaged and would need to be replaced. The agitator cam repair kit is part number 285811. Read More...
Bill May 27, 2013 for Model Number Roper RAS8245EW1 My upper agitator does not turn. What parts do I need? I also need a new dust cap. Thank you.
1 Answer Bill, you'll need to agitator repair kit, part number 285811, to correct the upper agitator not agitating. The dust cap (inner/barrier cap) is part number WPW10074580. Thanks! Read More...
Robert B. March 24, 2013 for Model Number dont know My electric is good to washer but the tub will not turn is the shaft broke? It makes a bang when you turn the tub on the inside. Will not start on it's own to spin or wash. Can you tell me what the problem is? This is a whirlpool front loader.
1 Answer Hello Robert B. We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Chuck January 30, 2013 for Model Number Magtag washer Model MAV85578WW The washer does not spin the water out of the clothes.
1 Answer Hello Chuck. You need to check the thrust bearing 12002213 and see if it releasing the brake when you turn it by hand. If not, replace the thrust bearing kit on the unit. Read More...
1 Answer Hello Pat. Based on the information you provided, you will need to order and replace the agitator cam kit in the unit. Read More...