Skip October 11, 2011 for Model Number Kitchenaid KUDI01ILBS4 You recommended changing control panel AP3726665. Original panel is all black. This does not appear all black in your picture. Can you confirm the color? Thanks.
1 Answer Hello Skip! The control panel listed as part number WP8531816 is all black in color. The start button itself seems to be gray. Thanks. Read More...
Skip October 09, 2011 for Model Number HUDI01ILBS4 On touch pad, Normal, Hi Temp Scrub, Energy Saver Dry, and Cancel all respond to touch. Heavy, Rinse Only, and Start buttons do not. Is the problem more likely the control pad or the control board?
Steve October 03, 2011 for Model Number kudio1ilbs6 Does the control panel include the control board?
1 Answer Hello Steve! No, the control panel WP8531816 does not include the electronic board WP8564543. Thanks! Read More...
Stu September 09, 2011 for Model Number KUDI01ILBL4A Normal light blinking. Press Cancel and that blinks for 15-20 minutes, then stops. Unit has had no malfunctions in 5 years of daily use, until this light that won't go out. Nothing obviously wrong inside the controls area; screens are clean; heating element has been working fine. Is there a fault code indicated by blinking normal? Is there a reset sequence? Thanks
1 Answer Stu, The blinking "normal" light indicates that the Normal key pad has failed, or the control is not seeing the keypad circuit. "PROBLEM: WONT RUN AND LED ABOVE KEY(S) IS BLINKING Stuck key(s) or shorted circuit(s) in keypad. Shorted circuits or connections on the control that read the keys. 1. Unplug dishwasher or disconnect power. 2. Check/replace control. You will most likely need the control panel / keypad assembly WP8531816 . Thanks and Good Luck Read More...
Richard June 18, 2011 for Model Number KUD01ILBL6 Control constantly keeps defaulting to rinse, dishwasher only goes thru rinse cycle. Is this the control panel or the control module?
1 Answer Hello Richard! If the buttons are the panel are not responding to touch then you will need to replace to the control panel WP8531816. If you can select a cycle but the unit will only rinse replace the control board WP8564543. Hope this helps! Read More...