Cindy June 24, 2012 for Model Number gmc275pdb4 My combo whirlpool gold elctric oven displays say e1 f2 ?
1 Answer Hi Cindy. The F-2 is a bad white keypad part # 8300410. The black keypad is part # WP8300411. The E-1 is a temperature sensor shorted part # WPW10131825. Thank You. Read More...
Tom January 15, 2012 for Model Number gmc305pdq6 Hi, I got this board and it came with a oven size reprogramming procedure. Well in the process of the program the power went off to the house. I reprogramed the hole system after the power came on and now the clock comes up and has a start? next to it, then the clock goes blank---but everything still works---no clock? Please let me know what to do.
1 Answer Tom, Here's some info that should help you out "The START/ENTER pad begins any oven function except the Timer. If not pressed within 5 seconds after pressing a function pad, the “START?” indicator light will flash as a reminder. On some models, “START?” will appear on the display. If not pressed within 4 to 5 minutes (depending on your model) after pressing a function pad, the oven display will return to the time of day mode and the programmed function will be cancelled." You need to press the start button after you progrsam in the time. " This is a 12 hour clock and does not show a.m. or p.m. To Set:Before setting, make sure the oven, Timer and Timed Cooking are off. 1. Press CLOCK. 2. Press the HR or MIN “up” or “down” arrow pads to set the time of day. 3. Press CLOCK or START/ENTER. To Disable: The clock time can be disabled so that it does not show on the display. To disable, press and hold CLOCK for 5 seconds. To display the clock time again, press and hold CLOCK for 5 seconds and the time of day will show on the display. The clock time should not have to be reset." Good Luck and Thanks Read More...
Shon January 15, 2012 for Model Number gmc275pdb6 I am getting a F2 on my display. What does this mean?
Janet October 14, 2011 for Model Number gmc275pdb2 What is the difference between part #AP3175501 and the control panel?
1 Answer Hi Janet. The control panel assy. is the keypad that sends commands to the microcomputer. The control board then send the voltage to the circuit needing to perform the task needed. Control panel is part # WP8300411 (for black), for white use part # 8300410. Thank you. Read More...
Janet October 14, 2011 for Model Number gmc275pdb2 Does this part include the front control panel too?
1 Answer Hello Janet. No, the micro-computer WP4456048 does not include the control panel. You will need to order that separately. Thank You. Read More...
Janet October 14, 2011 for Model Number gmc275pdb2 Will this part allow me to control the use of microwave and oven? To set timer for microwave, baking and broiling unit and use all function numbers on each appliance?
1 Answer Hi Janet. This is the correct part , it does control all commands. Part # is WP4456048. Thank You. Read More...
1 Answer Jari, The F2 E0 code usually indicates an issue with the touchpad assembly, not the ERC/Clock. Had you supplied a model number, we would have been happy to supply the part number you need. Good Luck Read More...